2 replies to this topic

[YEETthatdart]

I made a basic removable hopper for the nerf zeus using some 3/4 inch pvc that was bored out to around 5/8 inch ID that I bought from home depot.I used around 1 1/2 feet in total to make this,I also used 2 elbows and a coupler on the end,I also added an end cap with a chunk of leftover pvc to make sure the rounds don't fall out.The pencil is to hold down the mag lock on the zeus,this can be removed easily but I left it in.This holds around 16 rival rounds but can be extended around the gun,but may require a fan similar to OutOfDart's HIRricane mod,I just made this to reload on the go and it works pretty well for a gravity fed hopper.

Attached Thumbnails

• 
• 

[joeya2001]

I like it simple yet efficient, have you had any problems with jams or balls getting stuck inside?

[YEETthatdart]

Hi, besides the occasional need to lean the gun down in order to feed the rounds I have had no jams with it.