Jump to content


Photo

Orange mod works Longshot kit failure


3 replies to this topic

#1 Arctic Hunter

Arctic Hunter

    Member

  • Members
  • 32 posts
  • State:Arizona
  • Country:United States

Posted 31 May 2018 - 02:48 PM

So i installed an OMW stage one kit into my Longshot a while back and I noticed the performance differed from what I've heard about the kit. So I Chronographed it on my friends chrono and it was only hitting around 65-70 fps. Is this normal for the kit? I also increased the seal with electrical tape, but I should probably use tephlon tape. I also think the plunger should be re-lubricated. Or is the 70ish FPS normal? Thanks.
  • 0

#2 blitz

blitz

    Member

  • Members
  • 285 posts
  • Location:Charlottesville
  • State:Virginia
  • Country:United States

Posted 31 May 2018 - 04:43 PM

I'm guessing you didn't remove the air restrictor, so you should definitely do that. Also should relube if you haven't already.

Guide here: http://modworks.blog...-mod-guide.html

 

AR removed LSes should top out at ~100fps.


  • 0
Blitz, member of the FNBS
"sexual innuendo no intendo"

#3 Arctic Hunter

Arctic Hunter

    Member

  • Members
  • 32 posts
  • State:Arizona
  • Country:United States

Posted 31 May 2018 - 04:45 PM

I forgot to mention that I did remove the air restrictor. My bad. I probably do just need to re lubricate it. Thanks
  • 0

#4 Arctic Hunter

Arctic Hunter

    Member

  • Members
  • 32 posts
  • State:Arizona
  • Country:United States

Posted 01 June 2018 - 12:55 PM

Thanks! So I opened it, and the electrical tape i used on it had fallen off and seemed to be caught in the plunger head. So I replaced it with Teflon tape and re lubricated it, and it seems to be firing better now. I guess I should have just maintaneced it before posting this. Lol
  • 0


0 user(s) are reading this topic

0 members, 0 guests, 0 anonymous users