Jump to content


Photo

Stampede and XBZ sizes

stampede XBZ

5 replies to this topic

#1 Trashmouse

Trashmouse

    Member

  • Members
  • 26 posts

Posted 14 February 2017 - 09:39 AM

Hello everbody.

 

I was wondering if it was possible to integrate a Stampeden and an XBZ in to a Firefly shell. So i wanted too know the sizes of the Stampede internals except for the Stampede handle and the XBZ tank + pump length.

I prefer the measurments to be in CM but Inch's are also good.

 

Thanks in advance


Edited by Trashmouse, 14 February 2017 - 11:42 AM.

  • 0

#2 Maniacal Coyote

Maniacal Coyote

    On Increasingly Thin Ice

  • Members
  • 358 posts

Posted 14 February 2017 - 02:41 PM

No, the stampede is too large to fit into a Firefly. However, you could integrate the Firefly on as a stock if you use a LiPo pack.


  • 0

I know how to help you because I have broken every rule in the book.


#3 Trashmouse

Trashmouse

    Member

  • Members
  • 26 posts

Posted 14 February 2017 - 02:56 PM

No, the stampede is too large to fit into a Firefly. However, you could integrate the Firefly on as a stock if you use a LiPo pack.

Oh well. Thanks for the reply.

I'll figure something out


  • 0

#4 Draconis

Draconis

    I am not Lord Draconical

  • Members
  • 2,712 posts

Posted 14 February 2017 - 05:00 PM

What exactly is your endgame?  If you simple want the Stampede internals in a Firefly setup, just get a Swarmfire, Speedswarm, or Powerbell.


  • 0
[15:51] <+Noodle> titties
[15:51] <+Rhadamanthys> titties
[15:51] <+jakejagan> titties
[15:51] <+Lucian> boobs
[15:51] <+Gears> titties
[15:51] <@Draconis> Titties.
[15:52] <+Noodle> why is this so hard?

#5 Trashmouse

Trashmouse

    Member

  • Members
  • 26 posts

Posted 15 February 2017 - 06:14 AM

What exactly is your endgame?  If you simple want the Stampede internals in a Firefly setup, just get a Swarmfire, Speedswarm, or Powerbell.

I recently aquired a firefly shell, but i didn't know what to do with it. At first I wanted to be generic and put a stryfe inside, but stryfes are boring. 

I figured I could be original and integrate a stampede. The only problem is is that the stampede already has a nice stock. 

So why not make a "sleeper" (it won't look sleeper when there is a mag sticking out) stampede-firefly. So i was wondering if it would fit.


  • 0

#6 DjOnslaught

DjOnslaught

    Member

  • Members
  • 350 posts

Posted 15 February 2017 - 12:03 PM

I recently aquired a firefly shell, but i didn't know what to do with it. At first I wanted to be generic and put a stryfe inside, but stryfes are boring. 
I figured I could be original and integrate a stampede. The only problem is is that the stampede already has a nice stock. 
So why not make a "sleeper" (it won't look sleeper when there is a mag sticking out) stampede-firefly. So i was wondering if it would fit.


Theres really no reason for the firefly to be added to a stampede in the way you describe. You could possibly however cut down the firefly to put on top the back end of the stampede to utilize a xbz that fires threw the sight ports in the carry handle
  • 0



0 user(s) are reading this topic

0 members, 0 guests, 0 anonymous users