Elite Rayven Rewiring - help!
#1
Posted 24 December 2016 - 10:58 PM
I'm in the process of re wiring my elite rayven. I thought I was finished, but turning it on revealed that the flywheels spin continuously, and the switch stops them. This is the opposite of the desired result. What am I doing wrong? Also, only the bottom flywheel spins. The top doesn't. If anyone could help me that would be great, as I can't really fear an elite rayven anymore. Pictures are attached.
Thanks,
AJ
#2
Posted 25 December 2016 - 01:09 AM
Very easy fix. You wired the switch in such a way that it is normally closed (NC) as opposed to normally open (NO). On a three pin switch like the one you have, the "common" pin is usually the middle one, and the placement of the wire on either of the outer pins determines whether your switch is NO or NC. So, instead of having the wires connected to the middle and top pins, try soldering the wires so they are connected to the middle and bottom pins.
#3
Posted 25 December 2016 - 09:14 AM
#4
Posted 25 December 2016 - 01:53 PM
Someones moving in on my signing name game...
Umm, it might not be spinning because of maybe it not having such a good connection, maybe you did something that might have burned the motors out, or broke them.
Is the bottom ones flywheel maybe stuck in place, or the actual thing that spins got jammed
Are you sure the flywheel and motor and connected fully?
Or, just follow Aeromechs advice, because things like blasters randomly breaking happens.
Also, merry christmas, and happy first post, welcome to Nerfhaven
-Montymarks
("That thing that says 1 warning post is wrong, it's really 3-6, I lost count 2 months ago")
Edited by Montymarks, 25 December 2016 - 01:54 PM.
sorry for how I was a year ago
#5
Posted 25 December 2016 - 03:23 PM
So, this is a project with my brother. He thought that the soldering points were the metal posts that stick out that the flywheels spin around. Whoops. I desoldered it and cleaned it off. I'm afraid that the plastic housing melted around the bar and it can no longer spin.
Is there a way I can fix this? If not can I use a stryfe flywheel cage? Rayvens are like 70 dollars on eBay so I can't really get a replacement...
#6
Posted 25 December 2016 - 06:22 PM
Edited by JospehSquared, 25 December 2016 - 06:22 PM.
#7
Posted 25 December 2016 - 06:34 PM
Could I theoretically put a stryfe flywheel unit in instead?
#8
Posted 25 December 2016 - 06:37 PM
#9
Posted 25 December 2016 - 07:07 PM
#10
Posted 25 December 2016 - 07:25 PM
Edited by JospehSquared, 25 December 2016 - 07:25 PM.
#11
Posted 26 December 2016 - 08:20 PM
Okay, so I realized what happened.
So, this is a project with my brother. He thought that the soldering points were the metal posts that stick out that the flywheels spin around. Whoops. I desoldered it and cleaned it off. I'm afraid that the plastic housing melted around the bar and it can no longer spin.
Is there a way I can fix this? If not can I use a stryfe flywheel cage? Rayvens are like 70 dollars on eBay so I can't really get a replacement...
The stryfe cage is not compatible with the rayven. Just pick up a couple rhino 130 motors, rewire with 16awg or 18awg wire and a good microswitch and call it awesome
1 user(s) are reading this topic
0 members, 1 guests, 0 anonymous users