5 replies to this topic

[Daniel12]

I have the same problem too. I think we'll both need some help!

[Thatone]

Nerf darts are pressure fit into the breach area so taking out the AR won't change chambering darts or firing but the AR stops the blaster from dry-firing (dry firing to much will break the blaster).

The AR might be pushing out your darts if there worn-out, but sounds like your dart tooth my not be pushing the darts fully in to the chamber. I would try to put a different spring there (like a retaliator one) and that could also fix your problem.

 

I hope this helps! -Thatone 

[Daniel12]

I found out that the darts that do not shoot for me are the ones that pop out of the breech when I load them in. How can I fix this?

[Thatone]

Do you have a orange one? I hear they are hit and miss, your breach could have a slightly wider breach area if you push out the metal pin (its where the breach and sled meet) and put a breach from another blaster or a drop in kit that should fix it.