Jump to content


Alpha trooper Elite Darts Falling off. Problem with AR?

Alpha trooper problem issue AR

5 replies to this topic

#1 Guest_DrShtainer_*

Guest_DrShtainer_*
  • Guests

Posted 10 December 2016 - 09:36 PM

Hello there!

 

So I got myself an Alpha trooper Elite recently and I really dig it, comparing to other spring elites I got, however there is slight, but annoying problem with it- most not fresh new darts, will just fall through the barell if pointed downward. It may be not a big deal, but using cover 90% requires lowering the barell, thus losing one shot, dry firing it, and priming again.

My question: Is it an AR pushing too hard? Is AR removal gonna help? Or is losing dart peg will make it worse and all darts will fall through the barrel?

 

Please help.)


  • 0

#2 Daniel12

Daniel12

    Member

  • Members
  • 17 posts

Posted 11 December 2016 - 03:01 PM

I have the same problem too. I think we'll both need some help!


  • 0

#3 Thatone

Thatone

    Member

  • Members
  • 6 posts
  • State:Washington

Posted 14 December 2016 - 09:16 PM

Nerf darts are pressure fit into the breach area so taking out the AR won't change chambering darts or firing but the AR stops the blaster from dry-firing (dry firing to much will break the blaster).

The AR might be pushing out your darts if there worn-out, but sounds like your dart tooth my not be pushing the darts fully in to the chamber. I would try to put a different spring there (like a retaliator one) and that could also fix your problem.

 

I hope this helps! -Thatone 


  • 0

Whats being practical? A modded Stryfe or a modded Defender t3 at war and everyone else has Rapidstrikes? I'll take my luck with the Defender t3. 

 


#4 Daniel12

Daniel12

    Member

  • Members
  • 17 posts

Posted 17 December 2016 - 05:15 PM

I found out that the darts that do not shoot for me are the ones that pop out of the breech when I load them in. How can I fix this?


  • 0

#5 Guest_DrShtainer_*

Guest_DrShtainer_*
  • Guests

Posted 27 December 2016 - 12:19 PM

Nerf darts are pressure fit into the breach area so taking out the AR won't change chambering darts or firing but the AR stops the blaster from dry-firing (dry firing to much will break the blaster).

The AR might be pushing out your darts if there worn-out, but sounds like your dart tooth my not be pushing the darts fully in to the chamber. I would try to put a different spring there (like a retaliator one) and that could also fix your problem.

 

I hope this helps! -Thatone 

Dart tooth seems alright- Dart is fully fed into the chamber (just the tip is visible, shaft is in the chamber). But tip it down- it will fall right trough barrel.


  • 0

#6 Thatone

Thatone

    Member

  • Members
  • 6 posts
  • State:Washington

Posted 01 January 2017 - 07:19 PM

Do you have a orange one? I hear they are hit and miss, your breach could have a slightly wider breach area if you push out the metal pin (its where the breach and sled meet) and put a breach from another blaster or a drop in kit that should fix it.


  • 0

Whats being practical? A modded Stryfe or a modded Defender t3 at war and everyone else has Rapidstrikes? I'll take my luck with the Defender t3. 

 




Also tagged with one or more of these keywords: Alpha trooper, problem, issue, AR

0 user(s) are reading this topic

0 members, 0 guests, 0 anonymous users