43 replies to this topic

[Hunter]

Alright, as for integration, I was thinking of a single barreled AT2K. What do you think? I'll try to draw a design in paint soon...



Lots of room...

[okto]

will an AT3k fit? cos that would pretty much be guaranteed ownage...

[Ironman]

Nice guns guys. Wasn't this topic posted in the wrong section?
If not let me know.

[ShortShit]

enicially methinks it was because the barrel system was homemade, IE homemade section, even though the guns nerf.

[TheHaze]

I haven't done this mod, but because you move the barrel, wouldn't it be sweet to somehow put sommething like a SS2 in the space where the old barrel was.

[Ironman]

So you are going be the barrel. Okay I see now, thanks.

[Airsoft999]

My suggestion:
Integrate a AT2k Multi Barelled, or SM1500.
At3k probobly won't fit... the auto rotating mechanism part needs lots of room... unless you cut the 'zooka at the hole in the open space. That could work! OWNAGE!

[ShortShit]

I think getting a multi barreled at2k in there is quite possible. Would be awsome for sure.

[okto]

seriously consider the at3k. i mean...think of it: almost a dozen (depending on the RSCB mag) 80-foot-plus shots...it's like a modded at4k without the bulk.

[Hunter]

First Off...
ShortShit. Is it OK for me to discuss my integration of my RSCB Blast Bazooka here? If not, I will gladly delete this.

Here are the stats. I have plenty of "depth" (front to back) in the casing for an integration. 5" to the L connector, 6 3/4" in the casing, if I stuck it around the L connector. I have a comfortable 2 1/2" diameter for some form of turret. Here are the stats.
Available room: 5" by 2 1/2" diameter
Diameter of an AT3K turret: approx 2 1/2" (mine is NIB, can't really be sure)
Diameter of a SM3K turret: 4"
Diameter of an AT2K turret: 2"

Although a 3K would be cool, I would lose the auto-advance feature for the barrels. Because of this, I will attempt an AT2K integration. I will draw something in paint so you can get an idea.



EDIT: Oh no... where did my 2K O-ring go...

Edited by Hunter, 19 August 2004 - 03:45 PM.

[Airsoft999]

[QUOTE]Although a 3K would be cool, I would lose the auto-advance feature for the barrels. [QUOTE]


I doubt you would.
Simply cut the case at where the little hole is.

Edited by Airsoft999, 19 August 2004 - 07:53 PM.

[Hunter]

So, your saying I add on the AT3K case to the Blast Bazooka case? That sounds a bit on the ugly side. I was thinking of locating a turret inside the case, not creating Frankenstein.

[Black Wrath]

So, your saying I add on the AT3K case to the Blast Bazooka case? That sounds a bit on the ugly side. I was thinking of locating a turret inside the case, not creating Frankenstein.

See kids, we want to see a nice, clean, pretty girl integration! On the serious side though, I suggest an AT2k to fit in there. I am in favour of making it look pretty, because anyone can tape two blasters together and call it beautiful.

The AT2k would fit seamlessly, and would provide 4 85'+ shots along with your LBB's 8? 120' shots.

Brilliance.

[Airsoft999]

No. If you look onto the Large opening, you can see where the "Hole" is. The AT3K Barrel end stub thing should be able to fit there. So you could cut the Bazooka case there, and the AT3K would fit in. I'm all for integrating in an AT2K though.

[Alexthebeast]

Trust me, When I get my grubby mitts on one, If you don't, Hunter, I will put a 3k in there. And it Will look good. In the meantime, a 1.5k Turret is exactly 2.5" across, so if you just want the turn it youself barrels, use that, because it should fit in there perfectly.

[Hunter]

I don't have a 1.5K turret at my disposal, unfortunately. I guess I'll open my 3K and take some messurements, but I'm looking at a 2K right now. I'll get some 2K internal pictures of it beside the BB for comparison.

PS. my BB is a 5 shot clip.

PPS. Airsoft, there is no other hole. I have an L connector sticking out of it.

Edited by Hunter, 20 August 2004 - 02:20 PM.

[okto]

with that PVC mostrosity sticking out the top, you've pretty much already abandoned aesthetics; just chop the back off an AT3k and attach it to the front of the BB.

[Black Wrath]

with that PVC mostrosity sticking out the top, you've pretty much already abandoned aesthetics; just chop the back off an AT3k and attach it to the front of the BB.

It actually looks quite clean to me. Must be the eyes... always the eyes.

[Airsoft999]

Yes, it looks very purty.