Jump to content


Photo

Nerf Elite Mega Centurion - Preview and Internals

No speculation needed.

32 replies to this topic

#26 shmmee

shmmee

    Member

  • Members
  • 467 posts
  • Location:West Valley, Ut.
  • State:Utah
  • Country:United States

Posted 28 June 2013 - 04:39 PM

If you put some silicone grease on your finger you can polish un-curred e-putty to a smooth as glass finish. Perhaps if an internal backer (pvc?) was coated in silicone grease and placed inside the pt pressing firmly against a slotted side (something close to the pt ID) the slots could be puttied in with an internal finish smooth enough to seal against.

Edited by shmmee, 28 June 2013 - 04:42 PM.

  • 0
"and we should respect the people who make our blasters. Even if we do molest the hell out of them..."
~BritNerfMogul


#27 thedom21

thedom21

    Member

  • Members
  • 462 posts
  • Location:Saint Paul MN
  • State:Minnesota
  • Country:United States

Posted 28 June 2013 - 08:45 PM

Anything yet on the ID of the PT? I agree with shmmee but if we could find something with an OD the the same as the ID of the PT we could cover the tube in silicone grease and insert it and then fill the vents with epoxy putty or even just regular epoxy.
  • 0
Funny Irc moments

22:32 hookerninja I would just switch to 2 full 69's
22:32 hookerninja that would diddle shit

11:44 Zorn Her butt is too tiny even for limp 6th grade penis?
11:44 Zorn ergo the dildo

#28 arfink

arfink

    Member

  • Members
  • 246 posts
  • Location:Columbia Heights MN
  • State:Minnesota
  • Country:United States

Posted 03 July 2013 - 01:00 AM

Looks very cool. I'd probably use one stock, just because it looks like great impractical fun.
  • 0
A2GS + 4 meg RAM + 128 meg CF + 9600 Baud Lantronix = WIN

#29 NerfOfSteel

NerfOfSteel

    Member

  • Members
  • 31 posts
  • Country:United States

Posted 03 July 2013 - 07:46 PM

A reverse plunger tube? What happened NERF, I thought we were friends now? But seriously, how could it possibly get the claimed 100' range, or welts, with a reverse plunger tube?
I'm really getting pissed with NERF now. AUUUGGGHHHHH!!!
  • 0
Do all those other toy blaster companies really need to exist? Think, people. think.

#30 Duke Wintermaul

Duke Wintermaul

    Member

  • Members
  • 516 posts
  • Location:Dayton
  • State:Ohio
  • Country:United States

Posted 04 July 2013 - 03:05 AM

A reverse plunger tube? What happened NERF, I thought we were friends now? But seriously, how could it possibly get the claimed 100' range, or welts, with a reverse plunger tube?
I'm really getting pissed with NERF now. AUUUGGGHHHHH!!!


Think... how did the popular term 'nerf'd it' come to be?

Nerf.
  • 0

#31 Langley

Langley

    LGLF - Since 2002

  • Administrators
  • 2,988 posts

Posted 04 July 2013 - 12:46 PM

For everyone shitting all over this blaster, the reverse plunger is huge for a stock blaster, and the plunger rod looks as though it's as thick as a dart, which means there's no bottle neck like you see in most reverse plungers. The main difference between this plunger and a longshot (aside from the holes in the sides) is that there's more dead space.
  • 0

You can poop in my toilet anytime champ.

2016 Nerf War Schedule
Bless you, my son. Now recite 3 New Members Guides and 5 Code of Conducts for your sins.


#32 Rexar5

Rexar5

    Member

  • Members
  • 8 posts

Posted 08 July 2013 - 08:50 PM

Did you have any luck modding it Langley? I'd love to know if it gets a lot more impressive with those holes filled. The fact that it can get fairly good ranges even with the holes makes me excited for the overall potential of the blaster.
  • 0

#33 ozn rfnerd

ozn rfnerd

    Member

  • Members
  • 27 posts
  • Country:Australia

Posted 11 July 2013 - 08:43 PM

For everyone shitting all over this blaster, the reverse plunger is huge for a stock blaster, and the plunger rod looks as though it's as thick as a dart, which means there's no bottle neck like you see in most reverse plungers. The main difference between this plunger and a longshot (aside from the holes in the sides) is that there's more dead space.


Yes,

I think this blaster has more potential than it's being given credit for.

It may be difficult to find a suitable sized complete replacement for the plunger tube, but I'm thinking a 3D printed collar for the outside that has raised sections to fill the slots, then possibly using the smoothing/polishing methods described earlier to fill the inside of the slots with epoxy or putty.

If that was to work I'd probably go onto a heavy spring.

And then how about a full mag well insert that converted it to a standard clip/darts run through a 9/16" brass barrel...

Haven't seen one in person yet, but these are just ideas that spring to mind
  • 0


0 user(s) are reading this topic

0 members, 0 guests, 0 anonymous users