Jump to content


Photo

Nitron pistol /w Interesting find


10 replies to this topic

#1 Darthrambo

Darthrambo

    Member

  • Members
  • 116 posts

Posted 10 August 2012 - 01:08 PM

I did a pretty extensive minimization to a nitron. I found that without the from part of the blaster the discs started to veer left instead of right when exiting the barrel.
It looks like the issue with discs veering to the right with nitrons is actually caused by them bouncing off the left side of the barrel which probably causes a good bit of loss in range.
Without the loss of velocity from bouncing in the barrel the nitron might be able to get some impressive ranges with a volt mod.
Posted Image
Posted Image


I also tried weighted discs putting a thick bead of hot glue all the way around the inside of the disc. My theory was that the drag on the discs from air resistance was too much for the discs mass to take full advantage of added power. At 15v the nitron is getting far better ranges with the weighted discs. I can't measure now and probably wont ever take the time to do so.

The nitron is the only vortex that can weight discs around the inner ring do to the way ther torsion springs fling the discs using the inner ring.

Edited by Darthrambo, 10 August 2012 - 01:37 PM.

  • 0

#2 Daniel Beaver

Daniel Beaver

    HQRSE CQCK

  • Moderators
  • 2,074 posts
  • NerfHaven Subscription Supporter
  • Location:Minneapolis
  • State:Minnesota
  • Country:United States

Posted 10 August 2012 - 03:12 PM

That's going to look incredibly silly with a 40 round drum mag.
  • 0

#3 chavez guy

chavez guy

    Member

  • Members
  • 195 posts
  • Location:San Diego
  • State:California
  • Country:United States

Posted 10 August 2012 - 03:16 PM

That's going to look incredibly silly


So do a bunch of adults running around shooting each other with plastic toys, but that doesn't seem to deter most of us.

Edited by chavez_guy, 10 August 2012 - 03:16 PM.

  • 0
Hablamos Espaņol

#4 nine

nine

    Member

  • Members
  • 132 posts
  • Location:Edmonton
  • State:Alberta
  • Country:Canada
  • u/erfnay on Reddit
  • Erfnay on Youtube

Posted 10 August 2012 - 04:06 PM

How did you manage to minimize the dart pusher assembly? Does it just cram into the back part of the pistol?

Edited by nine, 10 August 2012 - 04:06 PM.

  • 0

Everyone hates engineers because they listen to what you say and then think about it.

 

Check out my YouTube!

 

 


#5 Darthrambo

Darthrambo

    Member

  • Members
  • 116 posts

Posted 10 August 2012 - 04:20 PM

How did you manage to minimize the dart pusher assembly? Does it just cram into the back part of the pistol?

Posted Image

Made it a semi auto since the gear ratio of the stock mechanism made it so that no matter how much juice you pumped in it, it was still slow.
  • 0

#6 Blue

Blue

    Member

  • Members
  • 2,222 posts

Posted 10 August 2012 - 04:25 PM

Great job with the mod and all, but are you going to be making a write-up? If not your post doesn't really belong here.
  • 0

#7 Darthrambo

Darthrambo

    Member

  • Members
  • 116 posts

Posted 10 August 2012 - 04:34 PM

I was just sharing the info on the barrel bounce and the weighted discs. If a few people ask for a write up I'll do one.
  • 0

#8 china

china

    Member

  • Banned
  • 3 posts

Posted 16 August 2012 - 10:33 AM

CAN YOU SHOW ME HOW THE BREACH WORKS

USER WAS BANNED FOR THIS POST

Edited by Zorn's Lemma, 16 August 2012 - 06:04 PM.
Do not pass go. Do not collect $200


#9 Storm King

Storm King

    Member

  • Members
  • 2 posts
  • State:Michigan
  • Country:United States

Posted 20 August 2012 - 12:58 AM

could you make a write up for this? i love minimized guns. i have a smg stampede that i just finished a few days ago
  • 0

#10 Daniel Beaver

Daniel Beaver

    HQRSE CQCK

  • Moderators
  • 2,074 posts
  • NerfHaven Subscription Supporter
  • Location:Minneapolis
  • State:Minnesota
  • Country:United States

Posted 20 August 2012 - 07:13 AM

could you make a write up for this? i love minimized guns. i have a smg stampede that i just finished a few days ago

It should be fairly self-explanatory from the pictures. All the cuts he made are clearly pictured, as well as his solution for re-positioning the dart pusher and the battery packs.

(Though I don't want to discourage Darthrambo from making a more thorough writeup)

Edited by Daniel Beaver, 20 August 2012 - 07:14 AM.

  • 0

#11 Darthrambo

Darthrambo

    Member

  • Members
  • 116 posts

Posted 28 August 2012 - 07:29 PM

[quote name='Daniel Beaver' timestamp='1344629565' post='320301']
That's going to look incredibly silly with a 40 round drum mag.
[/quote]
For the Beav
Posted Image

[quote name='Daniel Beaver' timestamp='1345464800' post='320721']
  • 0


0 user(s) are reading this topic

0 members, 0 guests, 0 anonymous users