Jump to content


Photo

Nerf Dart Tag Sharp Shot Modification


15 replies to this topic

#1 Kid Flash

Kid Flash

    Member

  • Members
  • 1,985 posts
  • Location:Amelia, Ohio

Posted 16 March 2011 - 08:27 PM

Posted Image

PLEASE READ BEFORE PERFORMING THIS MOD: This modification creates a lot of dead space, but still improves the range by a bit. If you don't want to open the blaster back up, either rebarrel it by yourself or wait for me to get brass to add it to the writeup.

First, a few videos:

Click Here and also Click Here.

I will be creating another video of it after the modification, but I'll wait till it's rebarreled.


----------------------------------------------------------------------------------------------------


These will just show how to open the blaster:
Posted Image
Posted Image
Posted Image

The internals:
Posted Image
Posted Image
Posted Image
Posted Image
Posted Image

I noticed that the spring wasn't getting full compression, and that it is about the size of a nickel, so this is what I did (basically a variation of the penny mod for the maverick) to get the spring to get more compression. Please note that after doing this, the blaster is still extremely easy to prime. The sleek build just gives it a great feel.
Posted Image
Posted Image
Posted Image
  • 0

#2 Kid Flash

Kid Flash

    Member

  • Members
  • 1,985 posts
  • Location:Amelia, Ohio

Posted 16 March 2011 - 08:28 PM

Now, remove the air restrictors:
Posted Image
Posted Image
Posted Image
Posted Image
Posted Image

Plug/cover that hole...
Posted Image
Posted Image
  • 0

#3 Nerf Gra

Nerf Gra

    Member

  • Members
  • 145 posts
  • Location:Richmond VA
  • State:Virginia
  • Country:United States

Posted 17 March 2011 - 12:00 AM

Can not believe your luck right now. 3$ you have got to be kidding me. Anyways I'm kinda sad to see an inverse plunger although we all knew it was going to be so. I really like that trigger design it looks like its a really smooth pull. About how big around is the plunger tube? Is it like Scout size? Can't wait to see what this thing does with some brass or PETG

Edited by Nerf_GrÓ, 17 March 2011 - 12:01 AM.

  • 0
QUOTE(VelveetaAvenger @ Dec 6 2010, 12:14 AM) View Post

Maybe there's no Mcmaster, but you could make the first coconut airtank.


#4 Irish8

Irish8

    Member

  • Members
  • 61 posts
  • Location:Clovis, CA
  • State:California
  • Country:United States

Posted 17 March 2011 - 02:22 AM

Wait, when the heck did this come out? Are we getting this as well as the speedload 6 and the quick 16?
  • 0
I'm going to bludgeon the smaller parts with the larger parts till I have plastic shards which I will melt into foregrips for blasters that WORK! - SonReeceSonJensen

#5 Kid Flash

Kid Flash

    Member

  • Members
  • 1,985 posts
  • Location:Amelia, Ohio

Posted 17 March 2011 - 04:01 AM

Can not believe your luck right now. 3$ you have got to be kidding me. Anyways I'm kinda sad to see an inverse plunger although we all knew it was going to be so. I really like that trigger design it looks like its a really smooth pull. About how big around is the plunger tube? Is it like Scout size? Can't wait to see what this thing does with some brass or PETG


Honestly. I'm not too sure about the diameter... It's about as big around as a nickel...

Wait, when the heck did this come out? Are we getting this as well as the speedload 6 and the quick 16?


I'm not entirely sure it was supposed to be out yet...
  • 0

#6 knexpert66

knexpert66

    Member

  • Members
  • 133 posts
  • Location:Somewhere

Posted 17 March 2011 - 06:31 AM

Quick 16, sharp shot, and swarm fire are already at Toys R Us. (well, at least for pre-order)

Quick 16 link: http://www.toysrus.c...c=prodCrossSell

Sharp Shoot link: http://www.toysrus.c...ductId=11267567 This one is not for pre-order, it's already on the shelves.

Swarmfire link: http://www.toysrus.c...c=prodCrossSell

Edited by knexpert66, 17 March 2011 - 06:55 AM.

  • 0
Please, call me Busted.

#7 Kid Flash

Kid Flash

    Member

  • Members
  • 1,985 posts
  • Location:Amelia, Ohio

Posted 17 March 2011 - 07:17 AM

Usless Info
Useless Link

Sharp Shoot link: http://www.toysrus.c...ductId=11267567 This one is not for pre-order, it's already on the shelves.

Useless Link


I don't know where your TRU is, but mine didn't have crap. I went to just about every store with Brit yesterday, and all I found was the Sharp Shot and 5 Scatter Blasts... We found the Barricade value packs, but I decided I didn't NEED it... He got some stuff he wanted though.
  • 0

#8 Solscud007

Solscud007

    Member

  • Members
  • 141 posts

Posted 17 March 2011 - 09:54 AM

I also found a Sharp Shot. They are found at your local Kohls. At least that is where Nerfornothing found his and I drove to mine this morning and picked it up for $9.09 on sale. They did not have any of the other DT guns.
  • 0

#9 Draconis

Draconis

    I am not Lord Draconical

  • Members
  • 2,712 posts
  • NerfHaven Subscription Supporter
  • Location:Salem, Oregon
  • State:Oregon
  • Country:United States
  • u/Parabolictoys on Reddit

Posted 17 March 2011 - 10:28 AM

Since it was at Goodwill, and had a "Salvage" tag on it, this is likely to have originated from the Target supply chain.
  • 0
[15:51] <+Noodle> titties
[15:51] <+Rhadamanthys> titties
[15:51] <+jakejagan> titties
[15:51] <+Lucian> boobs
[15:51] <+Gears> titties
[15:51] <@Draconis> Titties.
[15:52] <+Noodle> why is this so hard?

#10 knexpert66

knexpert66

    Member

  • Members
  • 133 posts
  • Location:Somewhere

Posted 17 March 2011 - 06:46 PM

Usless Info
Useless Link

Sharp Shoot link: http://www.toysrus.c...ductId=11267567 This one is not for pre-order, it's already on the shelves.

Useless Link


I don't know where your TRU is, but mine didn't have crap. I went to just about every store with Brit yesterday, and all I found was the Sharp Shot and 5 Scatter Blasts... We found the Barricade value packs, but I decided I didn't NEED it... He got some stuff he wanted though.

As I stated before, the Quick 16 and swarm fire are only up for pre-order. Just wanted to clarify that.
  • 0
Please, call me Busted.

#11 utahnerf

utahnerf

    Member

  • Members
  • 339 posts
  • Location:Grosse Pointe Park, Michigan in summer; Aspen, CO for school.

Posted 23 March 2011 - 06:13 PM

What are the ranges?

Edited by utahnerf, 23 March 2011 - 06:14 PM.

  • 0

#12 durka durka

durka durka

    Member

  • Members
  • 364 posts
  • Location:Durkadurkastan
  • State:Delaware
  • Country:United States

Posted 23 March 2011 - 06:47 PM

These remind me of those dart tag crossfires nerf used to make. Very nice mod. hopefully these have some sort of potential, but so far it doesn't look like it.
  • 0
"The warrior who cultivates his mind polishes his arms"

#13 Kid Flash

Kid Flash

    Member

  • Members
  • 1,985 posts
  • Location:Amelia, Ohio

Posted 23 March 2011 - 07:30 PM

What are the ranges?


I'd say high 40s right now... Honestly, I don't know. I'm getting some brass shipped to me, so I'll be rebarreling it when it gets here.

These remind me of those dart tag crossfires nerf used to make. Very nice mod. hopefully these have some sort of potential, but so far it doesn't look like it.


These are definitely better than crossfires... The shell is absolutely great, the trigger pull is so smooth, it's very easy to mod, etc.
  • 0

#14 utahnerf

utahnerf

    Member

  • Members
  • 339 posts
  • Location:Grosse Pointe Park, Michigan in summer; Aspen, CO for school.

Posted 23 March 2011 - 08:21 PM

Yeah, the trigger/catch design looks like it would warrant a smooth pull.

Edited by utahnerf, 23 March 2011 - 08:22 PM.

  • 0

#15 shadowblue42

shadowblue42

    Member

  • Members
  • 3 posts

Posted 29 March 2011 - 07:00 PM

just did this mod excpt added a 2nd spring that had a smaller diameter, i just cut little notches for it in the prt of the plunger with the + shaped fins

getting about the same ranges as AR drilled and Marker barreled NFs

10 shots

fired flat, im 5'7"

avg about 58 ft

high 67
low 54

oh, and 1st post , lol. been lurking a while

Edited by shadowblue42, 29 March 2011 - 07:01 PM.

  • 0

#16 Kid Flash

Kid Flash

    Member

  • Members
  • 1,985 posts
  • Location:Amelia, Ohio

Posted 31 March 2011 - 12:05 PM

just did this mod excpt added a 2nd spring that had a smaller diameter, i just cut little notches for it in the prt of the plunger with the + shaped fins

getting about the same ranges as AR drilled and Marker barreled NFs

10 shots

fired flat, im 5'7"

avg about 58 ft

high 67
low 54

oh, and 1st post , lol. been lurking a while


Cool. Thanks for the ranges.
  • 0


0 user(s) are reading this topic

0 members, 0 guests, 0 anonymous users