Jump to content


Photo

Raider First Mod

raider ar removal and barrel replacement

5 replies to this topic

#1 sharpshooter35

sharpshooter35

    Member

  • Members
  • 12 posts

Posted 05 February 2011 - 11:37 PM

I recently acquired my first raider, and I wanted to mod it. My only setback was, I had never modded a primary before. I preceded extremeley cautiously, and the mod come out successful. First it was a standard air restricter removal.
Posted Image

Then I found some kind of heavy metallic tubing, and I thought it would be perfect for a barrel. At first the tubing wouldn't go throught the hole in the front of the gun, so I had to widen it. I secured it with pumbers goop and I closed the gun up, test fired and it worked.
Posted Image

Finished Product
Posted Image

Edited by sharpshooter35, 05 February 2011 - 11:39 PM.

  • 0
92% of teens would cry if Miley Cyrus was about to jump off a building.
If you are part of the 8% who would say "Jump B****, JUMP!!!!" . . .
Copy and paste this in your signature.

Don't forget about the Jones Brothers

http://frozenfoam.blogspot.com/

#2 NerfGeek416

NerfGeek416

    Member

  • Members
  • 151 posts
  • Location:12180
  • State:New York
  • Country:United States

Posted 06 February 2011 - 12:53 AM

This should go in the Mods/Paintjobs thread.

Did you breech it or just stick a barrel in?
  • 0
 

#3 sharpshooter35

sharpshooter35

    Member

  • Members
  • 12 posts

Posted 06 February 2011 - 01:28 AM

This should go in the Mods/Paintjobs thread.

Did you breech it or just stick a barrel in?

i just stuck the barrel in, it works well though
  • 0
92% of teens would cry if Miley Cyrus was about to jump off a building.
If you are part of the 8% who would say "Jump B****, JUMP!!!!" . . .
Copy and paste this in your signature.

Don't forget about the Jones Brothers

http://frozenfoam.blogspot.com/

#4 utahnerf

utahnerf

    Member

  • Members
  • 339 posts
  • Location:Grosse Pointe Park, Michigan in summer; Aspen, CO for school.

Posted 06 February 2011 - 10:20 AM

You should remove the goop and replace it with a stronger adhesive, such as epoxy or JB Weld. Goop is not a great adhesive for this situation. Oh, and nice website on that computer.

Edited by utahnerf, 06 February 2011 - 10:21 AM.

  • 0

#5 sharpshooter35

sharpshooter35

    Member

  • Members
  • 12 posts

Posted 06 February 2011 - 10:53 AM

You should remove the goop and replace it with a stronger adhesive, such as epoxy or JB Weld. Goop is not a great adhesive for this situation. Oh, and nice website on that computer.

Thanks for the advice about the goop, as soon as I get some JB weld or epoxy I'll switch it out. As I said before, I'm a beginner
  • 0
92% of teens would cry if Miley Cyrus was about to jump off a building.
If you are part of the 8% who would say "Jump B****, JUMP!!!!" . . .
Copy and paste this in your signature.

Don't forget about the Jones Brothers

http://frozenfoam.blogspot.com/

#6 VACC

VACC

    Vacc is Legend

  • Founders
  • 3,265 posts
  • Location:New York
  • State:New York
  • Country:United States

Posted 06 February 2011 - 11:38 AM

We created the paintjobs and modifications thread so that write-ups consisting of no new techniques (or the application of old techniques toward new blasters) would have a home without clogging the boards with recycled information. That is where this belongs.
  • 0


0 user(s) are reading this topic

0 members, 0 guests, 0 anonymous users