Jump to content


Photo

Lanard Scatterblast Mod

Plug Pump, Peg Removal, Fix

10 replies to this topic

#1 iDrag0m1r

iDrag0m1r

    Member

  • Members
  • 66 posts

Posted 03 January 2011 - 11:42 AM

WARNING! HUGE PICTURES!

I'll be showing you all how to open/mod your Scatterblast

Tools
-Exacto Knife
-Glue Remover (I used Oops)
-Hot Glue
-Needle Nosed Pliers

On To the Writeup...

First, cut along the space here with your exacto knife.
Posted Image

Then cut along the line visable here.
Posted Image

You only have to cut down to halfway through the orange piece, then after a minute or two of careful peeling, you should get this.

Posted Image

Posted Image

Posted Image

There should be three pegs that look like they hold screws, and they should be glued in place, apply your favorite glue remover to them and it should come appart.

Posted Image

Then you can Remove the Pegs with your pliers.
The reason I took mine appart is because the pump head fell off, so glue that on, and plug the pump.

Posted Image

If your head didn"t come appart, take it appart and fill it with glue anyways, mine fell off fast when I just plugged the pump.

Then you should glue everything that had glue on it before back together, Put on the foam and glue it together!

Once it's dry your finnished and ready to diddle everyone in indoor wars!

I find 15+ 1 or 2 pumps is best.

Questions? Commensts? Flames?
  • 0
I AM JUNIOR!

#2 Forsaken angel24

Forsaken angel24

    Member

  • Contributors
  • 2,471 posts

Posted 03 January 2011 - 12:38 PM

Ranges with stock darts?
Ranges with Stefan darts?
Or better yet what is the kill radius?
  • 0
I don't get my kicks out of you,
I don't feel the way I used to do.
I know its bad,
After what we had,
But Iím just not the angel you knew.

#3 iDrag0m1r

iDrag0m1r

    Member

  • Members
  • 66 posts

Posted 03 January 2011 - 12:41 PM

I'm getting like a 20 foot raidus with 18 pumps and taggers. I'm currently using Ace foam so my stefans don't fit.
  • 0
I AM JUNIOR!

#4 Buffdaddy

Buffdaddy

    Do not buy from this member

  • DO NOT TRADE
  • 823 posts

Posted 03 January 2011 - 02:26 PM

Pump head fell off? That's a new one to me :-)

My old Scatterblast, before I accidentally destroyed it, had 3 inch CPVC barrels put into it. With stefans, you had ~30 ft. range, with 4-5 foot spread. If you plug one barrel on either chamber (each one feeds into 3 barrels, which is horrible for efficiency), you get 50 ft. range, with slightly less spread.

I really want to play around with my new one, I have a feeling you could turn it into a decent primary with a plugged/replaced pump, both chambers firing into a single hopper, and a homemade trigger lever to press the blast button down. Good deal for something I can buy for $10.
  • 0

#5 utahnerf

utahnerf

    Member

  • Members
  • 339 posts
  • Location:Grosse Pointe Park, Michigan in summer; Aspen, CO for school.

Posted 03 January 2011 - 11:22 PM

Are you saying that your stefans are too wide to fit into the barrels? I always found that Ace foam fit well into stock barrels.
  • 0

#6 iDrag0m1r

iDrag0m1r

    Member

  • Members
  • 66 posts

Posted 04 January 2011 - 08:44 AM

My Ace foam is a airgun fit in cpvc, no it's not to big, it's too small.
  • 0
I AM JUNIOR!

#7 cheyner

cheyner

    Member

  • Members
  • 240 posts
  • Location:Kingston
  • State:Ontario
  • Country:Canada

Posted 04 January 2011 - 10:44 AM

So what your saying is, if you rebarrel this with CPVC your darts would be perfect for it?
Why dont you rebarrel it then?
  • 0

Beaver's post claiming Kane's post claiming Demon Lord's post is correct is correct is correct.


Canadian Nerfers-R.I.P.

#8 utahnerf

utahnerf

    Member

  • Members
  • 339 posts
  • Location:Grosse Pointe Park, Michigan in summer; Aspen, CO for school.

Posted 04 January 2011 - 01:30 PM

Whoa, then your foam must be thin as hell.
  • 0

#9 iDrag0m1r

iDrag0m1r

    Member

  • Members
  • 66 posts

Posted 04 January 2011 - 04:36 PM

So what your saying is, if you rebarrel this with CPVC your darts would be perfect for it?
Why dont you rebarrel it then?

Because if I did, the darts would go strait up, and have like a 5 foot blast radius, which would be pointless.
  • 0
I AM JUNIOR!

#10 shmmee

shmmee

    Member

  • Members
  • 467 posts
  • Location:West Valley, Ut.
  • State:Utah
  • Country:United States

Posted 04 January 2011 - 06:23 PM

I've never played with one of these before. With a proper barrel fit could you shotgun load a pair of 1.5" steffans in each tube and still maintain a functional blast radius?
  • 0
"and we should respect the people who make our blasters. Even if we do molest the hell out of them..."
~BritNerfMogul


#11 Buffdaddy

Buffdaddy

    Do not buy from this member

  • DO NOT TRADE
  • 823 posts

Posted 04 January 2011 - 07:49 PM

I've never played with one of these before. With a proper barrel fit could you shotgun load a pair of 1.5" steffans in each tube and still maintain a functional blast radius?


I never tried this, but I would imagine this is the best setup. The main issue of the stock grenade is that, sure you can have a good blast radius, but there's not enough foam flying to guarantee a kill. Sure the darts can go 20 ft. to the side, but that's a large radius for only 6 darts. Doing this would decrease the radius, but increase the effectiveness.

Also, you have to lob this to guarantee the decent radius.

PRO-HINT: If you're playing indoors, you can throw the grenade against a wall, behind the person you're targeting. Works wonders!
  • 0


0 user(s) are reading this topic

0 members, 0 guests, 0 anonymous users