Edited by cpl pupdum, 26 February 2010 - 11:11 PM.
Removing Super Glue Connecting Brass And Plastic
#26
Posted 26 February 2010 - 11:09 PM
fly eagles fly
"Wow, Bob, wow"
the man from another place, twin peaks
#27
Posted 26 February 2010 - 11:11 PM
#28
Posted 27 February 2010 - 12:19 AM
#29
Posted 27 February 2010 - 12:22 AM
Edited by NerfBounty, 27 February 2010 - 12:22 AM.
#30
Posted 27 February 2010 - 12:27 AM
If I'm interpreting you correctly, the following is what I would do.
Break off the nub. Enough prying will break off almost anything from brass unless it's welded. Take out the black piece and once again pull and twist. If you did the bolt HC's way, it will be a lot harder, but if you did it Angel's original way, that black nub will come off pretty damn easy if all you used is gorilla glue. If it becomes apparent that you're going to need to bend brass to get stuff detached, then I would go for it. Brass is much easier to replace.
#31
Posted 27 February 2010 - 12:29 AM
#32
Posted 27 February 2010 - 12:38 AM
But honestly, same thing applies. It's fucking gorrilla glue on brass. It can't be that hard. Have your dad help if you can't do it.
#33
Posted 27 February 2010 - 01:28 AM
#34
Posted 27 February 2010 - 01:36 AM
sorry man i thoguht there was only one page, single it. it'll give you range and save you your money
But lose the best part about LongShots, the ROF.
#35
Posted 27 February 2010 - 01:46 AM
#36
Posted 27 February 2010 - 10:17 AM
That's not how Angel breeches work. The barrel is on the left.Ooooh, I know what you're talking about now. Why would you glue your barrel into that? So much easier/lower risk to glue it into the faux barrel, which is easily replaceable with other pipes.
But honestly, same thing applies. It's fucking gorrilla glue on brass. It can't be that hard. Have your dad help if you can't do it.
#37
Posted 27 February 2010 - 01:50 PM
#38
Posted 27 February 2010 - 03:26 PM
I dipped it in boiling water, and now it's fixed ,but Tantum in an Angel Breech you glue the left part of the breech into the Chamber.I know how angel breeches work. My longshot has one. You just said you glued it into the dart chamber, and I'm guessing this is the same part labeled dart chamber in CS's pic. If so, then yes, that was really stupid, but easily undo-able.
#39
Posted 27 February 2010 - 04:53 PM
Just because someone does it that way in a write-up, doesn't mean its the only or best way to do it. Instead of mindlessly copying someone's instructions, at each step, think to yourself and see if there is an easier or better way of doing it.I dipped it in boiling water, and now it's fixed ,but Tantum in an Angel Breech you glue the left part of the breech into the Chamber.I know how angel breeches work. My longshot has one. You just said you glued it into the dart chamber, and I'm guessing this is the same part labeled dart chamber in CS's pic. If so, then yes, that was really stupid, but easily undo-able.
3 user(s) are reading this topic
0 members, 3 guests, 0 anonymous users