How To Mod A Mad Hornet
Posted 03 March 2003 - 07:48 PM
Posted 04 March 2003 - 04:39 PM
No, it's just a normal Mad Hornet with a PC bladder replacing the solid air tank. Bladders allow for constant pressure, so your shots don't get weaker as you fire more. This one is too flimsy to be war effective, but you could easily make this surpass the Blastfire. This prototype fires around 12 shots(2 loads of darts) on a full bladder, all around 50'. Here's what I did.
-Cut off the back part of the case to make room for new air tank(you might not want to cut off as much as I did)
-Cut off the white part of the air tank. LEAVE THE GREEN PART IT'S ATTACHED TO.
-Attach the outgoing tube from the bladder to the outgoing hole in the green part. This hole leads to the trigger system, and then to the barrel.
-Take out the MH pump, and cut down the green part to make room for the PC pump.
-Try to glue, tape, epoxy everything in place(this is the part my gun falls short on)
I'd be glad to answer specific questions that you run into while making this...monster, but I'm too lazy to try to write up a clear guide.
AIM = MalaysianShrew.
Posted 04 March 2003 - 08:53 PM
0 user(s) are reading this topic
0 members, 0 guests, 0 anonymous users