Jump to content


Photo

How To Resurrect A Crossbow

How I built a wooden stock

20 replies to this topic

#1 Homestarune

Homestarune

    Member

  • Members
  • 189 posts

Posted 21 October 2009 - 01:55 PM

A few months ago a completely screwed up crossbow was sold on Ebay. Some dumbass bought this crossbow for way too much money thinking that they could make a worthy weapon out of it. I was the dumbass that bought it up. Here’s how I turned a broken toy into an effective weapon that could hold its own on the field of battle.

Credit goes to Split for discovering the replacement plunger tube.

Posted Image

This was what I bought. I had fun screwing around with shooting megas at my bedroom wall. The novelty of that however got old really quickly. Hey, it was marked as “heavily modified” so it couldn’t be a total loss, could it?

Posted Image

No surprise there, I suppose I just wasn’t awesome enough to realize what “heavy mods” had been skillfully preformed on this. My mortal eyes can only see a level 2 modification. That’s probably being generous all things considered.

Posted Image

I immediately set to work and cut some aluminum and steel to reinforce the internals. (these have long since been re-worked)

Posted Image

After that, I got to work creating a CPVC coupler inside the gun. I don’t have any pictures of that fully assembled. You’re not missing anything out on anything, you’ve all seen plenty of mediocre crossbows. I managed to get about of 70’ out of this. Needless to say, I wasn’t satisfied with this. A complete rework would be required to make it satisfactory. There was of course the problem of the stock. One of the best things about the crossbow is its comfort and ease of use.

From the moment I saw this gun online I wanted to see if an effective and comfortable stock could be created. So I decided on a method that to my knowledge had never been used before.

Posted Image

I wanted to see if it could actually be done. I also had a lot of free time and I was bored. Some people thought that I was crazy. I looked at a bunch of pictures online and broke out the pencils and curves. So began my four day project to create a wooden stock

Posted Image

I cut out the area that I had traced around.

Posted Image

Next, I traced out the area for the plunger rod and handle.

Posted Image

I then cut that area out as well.

Posted Image

Here’s a picture of the pieces that I had made beforehand to attach the stock to the gun.

Posted Image

I then used a router to make the necessary grooves for the plunger handle.

Posted Image

I then marked out what parts needed to be cut in order for them to be attached.

Posted Image

Things were beginning to come together.

Posted Image

And the other side.

Posted Image

I decided to trim things down for more aesthetic appeal, not that it was ever possible in the first place.

Posted Image

It was time to make the second half. I traced the mirror image of the first stock onto the block of wood

Edited by Homestarune, 21 October 2009 - 02:09 PM.

  • 0
We're not discouraging people from joining a Nerf forum, we're discouraging them from joining this forum. It's an important distinction because, frankly, we don't give a shit. The Haven was created to escape the idiotic masses, now they're all here. -cxwq

#2 Homestarune

Homestarune

    Member

  • Members
  • 189 posts

Posted 21 October 2009 - 01:56 PM

Posted Image

Here it was.

Posted Image

I drilled a hole through the piece of wood in order to cut the inside of the stock out first. This was done in order to make the routing easier and reduce the chances of the wood chipping.

Posted Image

The stock with the insides cut out.

Posted Image

The routings were much easier to make this time around.

Posted Image

I made most of the cuts here.

Posted Image

I cut out the rest here and then made the cuts and sanding so that the mounting piece would fit.

Posted Image

Here were the parts laid on top of each other, I had some more work to do in order to make sure that they would fit into the crossbow and mirror each other.

Posted Image

I trimmed up the parts here and went to work making them more even with each other using a belt sander. Holes were drilled so that removable pegs would fit. These pegs keep the stock together.

Posted Image

You many remember that the mounting pieces were rather wide. They were sanded down and the stock was slid over them to make sure that everything fit accordingly. I was quite happy with myself at this point.

Posted Image

I made routings on the edges of the gun to make it more comfortable and over all sexier. I then used wood glue to attach to stock to the mounting pieces.

Posted Image

I then scuffed up a small bar of metal and the wood and then applied epoxy to add even more strength. Even before this, my stock wasn’t going anywhere except into people’s faces.

Posted Image

Even then I still wasn’t done. However, it was incredibly comfy and helped steady the gun quite well.

Posted Image

Internals were replaced Splitlip style and a cut down [k25] spring replaced the stock crossbow spring. After trying to compress a [k26] with my hands, I decided that I’d rather not break my gun. This gun is loud as is when fired.

I took this gun to a war as it was in the last picture (I did have a speedloader for it) and it was pretty awesome. I had lost one of my catch springs so it didn’t always catch, but when it did I got some sweet long distance kills. However I felt that having only one shot was preventing me from making plays.

Posted Image

I dremeled out a hole of the front of the shell and integrated a 2k. I replaced the stock tubing with vinyl tubing. A piece of metal tubing connector is attached directly to the tank and the tubing is held in place with epoxy. I used a pretty heavy wire, on the key ring. I’m quite confident that this setup will hold for quite some time.

Posted Image

All together now!

Since I know people are going to pester me with this question the Crossbow maxes out at 120’. The integration gets a bit over 100’. I may eventually get around to painting it, but for now I'm not doing anything.

The stock is very comfortable and helps steady the gun incredibly well. The curve in the stock lets me quickly lower and raise the gun for a smooth transition from when I'm running to when I bring it up. Trigger to stock distance is equivalent to the distance from trigger to stock on a rifle. This was done to address the common complaint that the stock on the crossbow is too short. The wood halves make an effective "ironsight" straight down the barrel. In other words, even if it's not the prettiest looking, I love it and I'm sure it will serve me well in many wars to come.

Questions? Comments?

Edited by Homestarune, 21 October 2009 - 02:36 PM.

  • 0
We're not discouraging people from joining a Nerf forum, we're discouraging them from joining this forum. It's an important distinction because, frankly, we don't give a shit. The Haven was created to escape the idiotic masses, now they're all here. -cxwq

#3 Homestarune

Homestarune

    Member

  • Members
  • 189 posts

Posted 21 October 2009 - 02:00 PM

Reserved since I have 30 combined pictures.
  • 0
We're not discouraging people from joining a Nerf forum, we're discouraging them from joining this forum. It's an important distinction because, frankly, we don't give a shit. The Haven was created to escape the idiotic masses, now they're all here. -cxwq

#4 slowguitarman

slowguitarman

    Member

  • Members
  • 1,113 posts

Posted 21 October 2009 - 02:12 PM

Cool work, man. I will admit that I don't find this the least bit aesthetically pleasing, but it looks pretty nicely made either way. Nice job.
  • 0
QUOTE
Your dreams were tight like a baby

SGM's Shred Shop -Mod Service

NerfHaven's resident drama queen.

#5 black slate

black slate

    Member

  • Members
  • 29 posts

Posted 21 October 2009 - 07:45 PM

I just got to say that this is an awesome gun. I personally got to see it at the war. It's range and accuracy are scary. I do feel bad though, now with the 2k Equilox has twice the worries. (inside joke from the war)
  • 0
If you think your life sucks......
just remind yourself of your bestfriend



I have a photographic memory.
I just ran out of film when i was 3.

#6 TantumBull

TantumBull

    Member

  • Moderators
  • 1,929 posts

Posted 21 October 2009 - 07:59 PM

Holy shit, homesauce, that stock is amazing. While maybe not as good as the original one, given the absence of the stock one, I think this is probably the best solution possible. Amazing job, just awesome.

Edited by TantumBull, 21 October 2009 - 07:59 PM.

  • 0

#7 nerfitynerf

nerfitynerf

    Member

  • Members
  • 19 posts

Posted 21 October 2009 - 08:16 PM

Is it just me or has there been a lot more wood work on NH lately? Anywho, very nicely done. I'm enjoying the nice wood work on here. next up should be a luxury crossbow with stained wood inserts. *laughs* (just to get around the no IM talk rule)

Edited by nerfitynerf, 21 October 2009 - 08:18 PM.

  • 0
However, as a general rule you want to make your guns as loud as possible to scare the shit out of people, and it also gives you a bigger e-penis.
-chefdave

#8 lazer371

lazer371

    Member

  • Members
  • 78 posts

Posted 21 October 2009 - 08:19 PM

Great, but you might want to cut off a little of that wood off the back end of the stock,(looks like oak), or it'll get tiring holding it during a long nerf war. It looks unbalanced, is it like way off or it it barely anything? Other wise amazing!!!!!!
  • 0
I aint plannen' on unlearnin' no grammer.
(makes you think....)

They say, "If you can't beat 'em, join 'em." What?!?!?!?!
I say, "Screw that! Give me a bigger gun!"

#9 Mehku

Mehku

    Member

  • Members
  • 383 posts

Posted 21 October 2009 - 08:51 PM

If you painted the crossbow and paint the wood with the same color, it would probably look pretty good.

Otherwise, the stock is very impressive. Good job.
  • 0

#10 slowguitarman

slowguitarman

    Member

  • Members
  • 1,113 posts

Posted 21 October 2009 - 08:55 PM

Great, but you might want to cut off a little of that wood off the back end of the stock,(looks like oak), or it'll get tiring holding it during a long nerf war. It looks unbalanced, is it like way off or it it barely anything? Other wise amazing!!!!!!


It's better to have your gun unbalanced towards the back because your shoulder will hold it up, and it'll make you more accurate. I don't understand why people whine so much about weight. If carrying 4lbs. instead of 3 wears you out, then you need the exercise.
  • 0
QUOTE
Your dreams were tight like a baby

SGM's Shred Shop -Mod Service

NerfHaven's resident drama queen.

#11 white moonlight

white moonlight

    Member

  • Members
  • 305 posts

Posted 21 October 2009 - 09:00 PM

I use a nightfinder so weights really not a problem ;)

It's funny I saw this crossbow on Ebay.
Very good job and the stock addition looks very clean.

It'll look great if you give it a PJ, but it looks good anyway.
  • 0
On his trec to Colonfest...
VengefulWaffle BOY, 12 KILLED IN MOUNTAIN PASS BY WILD RACCON, EXPERTS SAY HE ATTEMPTED TO HOLD IT OFF WITH NERF NITEFINDERS
POLICE SAY: ALCOHOL MAY HAVE BEEN INVOLVED
Guess who he was talking about...

#12 Forsaken angel24

Forsaken angel24

    Member

  • Contributors
  • 2,472 posts

Posted 21 October 2009 - 09:08 PM

If carrying 4lbs. instead of 3 wears you out, then you need the exercise.


Bahwuahahahahaha! That's too funny.

and um, nice job on the wooden stock. It looks comfy.
Comfy in that old 70's couch your grandparents refuse to throw away kinda of way.
  • 0
I don't get my kicks out of you,
I don't feel the way I used to do.
I know its bad,
After what we had,
But I’m just not the angel you knew.

#13 thedarksideofnerf

thedarksideofnerf

    Member

  • Members
  • 124 posts

Posted 21 October 2009 - 10:03 PM

I hate to say it, because i'm very impressed with your wood work. But the stock doesn't realy go with the lines of the gun, and it's kind of an out of place.
Also how heavy is the stock, and how unbalenced is the gun.
  • 0
<death09>my girlfriend broke up with me and sent me pix of her and her new boyfriend in bed
<ktp753>ouch.
<death09>yeah.i sent them to her dad

#14 Homestarune

Homestarune

    Member

  • Members
  • 189 posts

Posted 21 October 2009 - 11:09 PM

The stock isn't that heavy. It weighs a couple pounds. I've ran around with it during a ridiculously hot war and it wasn't at all problematic. Having extra weight on the back of the gun helps keep the gun steady and was part of the design. As far as gun weight distribution goes, it's an ideal setup.

I hate to say it, because i'm very impressed with your wood work. But the stock doesn't realy go with the lines of the gun,

Thank you for the compliment, now go jump in a fire.

Edited by Homestarune, 22 October 2009 - 09:24 AM.

  • 0
We're not discouraging people from joining a Nerf forum, we're discouraging them from joining this forum. It's an important distinction because, frankly, we don't give a shit. The Haven was created to escape the idiotic masses, now they're all here. -cxwq

#15 Ambience 327

Ambience 327

    Member

  • Members
  • 561 posts

Posted 22 October 2009 - 09:21 AM

I hate to say it, because i'm very impressed with your wood work. But the stock doesn't realy go with the lines of the gun, and it's kind of an out of place.


I have to disagree here. It does look out of place, but I don't think it is due to not matching the lines of the blaster - I think it does that fairly well. I think the odd look is due to the dramatic color difference from purple plastic to stained wood. It just looks odd in the transition. A paintjob would clear that up, but the OP said he may or may not do that. Either way, great job resurrecting a nearly-dead blaster into the beast it should be.
  • 0
Foam in the Fort IV
The fourth exciting Nerf War in Fort Wayne, IN.

#16 Equilox

Equilox

    Member

  • Members
  • 95 posts

Posted 22 October 2009 - 11:23 AM

I am the second person to say this but this thing is amazing, great accuracy and distance. The stock is very comfortable. (He let me hold it once :P ) The weight it adds, as homestarune said, balances the gun. It really is a thing of beauty.
  • 0
"In my Zombie plan I use my arsenal of foam to fend of the hoards of the undead as I make my way to Canada....... good luck to you Simmons."

#17 CAPS

CAPS

    Member

  • Members
  • 322 posts

Posted 22 October 2009 - 07:30 PM

Excellent woodwork.
Do you plan to paint any of the gun?
  • 0
It's a link to google......you idiots are worse than the spammers.
-Vacc

#18 Captain

Captain

    Member

  • Members
  • 814 posts

Posted 31 October 2009 - 11:23 PM

I was actually looking at my crossbow the other day and I wondered if anyone had sawed the stock off of theirs. Looking at the one you bought, I can see it just makes it uglier.

Anyway, good job making it better than it was. Nice work especially on the stock.
  • 0
I don't care what anyone else says, Atom Blasters are fucking awesome.

#19 eliman

eliman

    Member

  • Members
  • 38 posts

Posted 01 November 2009 - 12:10 PM

Just saying how does the crossbow feal without the stock. nice mod by the way
  • 0
''you can walk it's ment for peopel'' -my dad

#20 angelfalcon

angelfalcon

    Member

  • Members
  • 61 posts

Posted 24 December 2009 - 12:34 PM

I know this is a necro, but it's still on the first page and I have something to add to the topic.

I would swap the positions of the pump and the AT2K tank. The pump, it would seem, would be more comfortable at the bottom. The barrel, while admittedly looking menacing at the bottom there, could go at the top without performance loss.

But then, if you find it comfy to pump it from up there, that's cool.
  • 0
QUOTE

According to your mom, size matters. My blaster is four feet long. What about yours?

QUOTE

I measured mine and I got about 11 inches.

#21 Talio

Talio

    Not your mother

  • Contributors
  • 2,781 posts

Posted 24 December 2009 - 02:39 PM

I won't ban you, but that really wasn't worth bringing up an old topic cause now 90 noobs are going to post after you saying nothing at all.
  • 0
New posts on my blog, check it out. - Click on the ad too, cause I get money per click. Give back to the Admin team for once!


1 user(s) are reading this topic

0 members, 1 guests, 0 anonymous users