Jump to content


Photo

Barrel Spacer Templates


35 replies to this topic

#1 Ryan201821

Ryan201821

    Prince Edward

  • Contributors
  • 1,892 posts

Posted 11 August 2009 - 05:56 PM

So I've had a few people ask me about polycarbonate barrel spacers for turreted blasters.

I figured I would share these with the community if anyone was interested. Adjust hole size according to your barrel material. Popular barrel material OD's:

OMC's PETG (thick or medium): .572
1/2" Polyester: 5/8"
1/2" CPVC: 5/8"
Brass: Self explanatory.

Dart Tag Blaster
SuperMaxx1500
Airtech2000
Firefly
Lanard Quadshot
Airtech 3000
SuperMaxx3000 (Yellow or Green)
Airtech 4000
Arrowstorm
Tetrastrike

I cut them from 1/4" material. If there is a certain blaster someone would like barrel spacers for, I'll see what I can do.


Enjoy.

Edited by Ryan201821, 07 July 2011 - 04:00 AM.

  • 0

#2 Galaxy613

Galaxy613

    Member

  • Members
  • 999 posts

Posted 11 August 2009 - 08:35 PM

Why aren't you a contributor yet? You're not as awesome as Captain Slug, but dammit, you're trying.
  • 0
[Former Caretaker of the Guru Mk2]

#3 CoasterDynamix757

CoasterDynamix757

    Member

  • Members
  • 390 posts

Posted 11 August 2009 - 08:36 PM

Will you machine these for sad souls like myself who cant make them?
  • 0
Is it fear or courage that compels you?

Coaster's Everything Thread.

#4 slowguitarman

slowguitarman

    Member

  • Members
  • 1,113 posts

Posted 11 August 2009 - 08:58 PM

Will you machine these for sad souls like myself who cant make them?


Do you have a Dremel? If so, you can make them. A drill is nice but not necessary.
  • 0
QUOTE
Your dreams were tight like a baby

SGM's Shred Shop -Mod Service

NerfHaven's resident drama queen.

#5 Ryan201821

Ryan201821

    Prince Edward

  • Contributors
  • 1,892 posts

Posted 11 August 2009 - 11:06 PM

Will you machine these for sad souls like myself who cant make them?

If enough people are interested, I may make a bunch. If I do, I'll post it in the trading thread.
  • 0

#6 Jangadance

Jangadance

    Member

  • Members
  • 676 posts

Posted 11 August 2009 - 11:26 PM

Will you machine these for sad souls like myself who cant make them?

If enough people are interested, I may make a bunch. If I do, I'll post it in the trading thread.

I'm interested in SM1500's (about 4 potentially) and AT2k's (maybe just a couple).

I have a dremel and could probably do it myself, but you sort of have a "reputation" for this sort of clean stuff.

Also, I didn't really intend to start purchasing polycarbonate any more than calcium carbonate... coral calcium is the miracle cure after all! But seriously, I don't even know where to buy the kind of materials you crazy modders come by. :)
  • 0
"The 'dance goes on..."

#7 Soothsayer

Soothsayer

    Member

  • Members
  • 663 posts

Posted 12 August 2009 - 01:11 AM

Could you just trace these off your computer screen onto a piece of paper and they'd work?
  • 0

yeah I'm that guy who made that cool thing with the cool paint.


#8 Ryan201821

Ryan201821

    Prince Edward

  • Contributors
  • 1,892 posts

Posted 12 August 2009 - 02:22 AM

Print them out on paper and they'll be the correct size. Just download that file. It's a word document.
  • 0

#9 Soothsayer

Soothsayer

    Member

  • Members
  • 663 posts

Posted 12 August 2009 - 03:08 AM

I know that's what you're supposed to do, but I have no printer, and was just wondering if I could trace off my screen. Thanks, though.
  • 0

yeah I'm that guy who made that cool thing with the cool paint.


#10 slowguitarman

slowguitarman

    Member

  • Members
  • 1,113 posts

Posted 12 August 2009 - 11:17 AM

I know that's what you're supposed to do, but I have no printer, and was just wondering if I could trace off my screen. Thanks, though.


Since every computer screen is different, it is doubtful that you could just trace it off. You could go to a public library though. They typically have printers for open use.
  • 0
QUOTE
Your dreams were tight like a baby

SGM's Shred Shop -Mod Service

NerfHaven's resident drama queen.

#11 Galaxy613

Galaxy613

    Member

  • Members
  • 999 posts

Posted 12 August 2009 - 03:21 PM

I know that's what you're supposed to do, but I have no printer, and was just wondering if I could trace off my screen. Thanks, though.


Since every computer screen is different, it is doubtful that you could just trace it off. You could go to a public library though. They typically have printers for open use.


That or get a ruler and open the document up and try to get it so everything is to scale on your screen, and then trace it.
  • 0
[Former Caretaker of the Guru Mk2]

#12 CoasterDynamix757

CoasterDynamix757

    Member

  • Members
  • 390 posts

Posted 13 August 2009 - 02:50 AM

Well Ryan I am very intrested in a few spacers. But if and when you offer these for the public (which would be awesome!!1!1!!1) will custom holes be applicable? I could use quite a few custom AT2K and SM1.5K spacers for my barrels.
  • 0
Is it fear or courage that compels you?

Coaster's Everything Thread.

#13 wingd man

wingd man

    Member

  • Members
  • 514 posts

Posted 13 August 2009 - 07:39 AM

DTB spacer plans would be awesome... on second thought, I can make them myself.
Not for me, but I think several people might like Doomsayer spacers (with the center cut out).
  • 0

#14 Kid Flash

Kid Flash

    Member

  • Members
  • 1,985 posts

Posted 13 August 2009 - 09:11 AM

DTB spacer plans would be awesome... on second thought, I can make them myself.
Not for me, but I think several people might like Doomsayer spacers (with the center cut out).

I'd definately like both of those... How about a rf20? Just if you have time... I know someone made them once but can't find it.

Edited by Kid Flash, 13 August 2009 - 09:12 AM.

  • 0

#15 Glint

Glint

    Member

  • Members
  • 315 posts

Posted 13 August 2009 - 09:52 AM

I'd definately like both of those... How about a rf20? Just if you have time... I know someone made them once but can't find it.

I'm pretty sure it was oodalumps with his RF20.

SGM made Doomsayer spacers, but if I remember correctly he just roughly sketched some out and whipped them up. No perfection, but at least they worked well.

Edited by Glint, 13 August 2009 - 09:53 AM.

  • 0
QUOTE

This has spiraled beyond uselessness into utterly stupidy.
- VACC
Read it again until you figure it out.

#16 slowguitarman

slowguitarman

    Member

  • Members
  • 1,113 posts

Posted 13 August 2009 - 12:36 PM

Glint, I appreciate you trying to help, but assumptions are no good for anyone. The only ''rough'' spacer I made was the first one. I made one for Lt. Stefan, and I made a wooden one for myself, and they were both measured out and made very well. Nothing rough about them.

Sorry, Ryan, for the distraction from your thread.

EDIT to Glint below: It's no big deal. I may have not even posted about Lt. Stefan's.

Edited by slowguitarman, 13 August 2009 - 03:10 PM.

  • 0
QUOTE
Your dreams were tight like a baby

SGM's Shred Shop -Mod Service

NerfHaven's resident drama queen.

#17 Ryan201821

Ryan201821

    Prince Edward

  • Contributors
  • 1,892 posts

Posted 13 August 2009 - 01:28 PM

Problem is I don't have any of those blasters. I can make templates for the RFDG, since I'm holding Zorn's hostage.

I'll work on that tonight.
  • 0

#18 Glint

Glint

    Member

  • Members
  • 315 posts

Posted 13 August 2009 - 02:41 PM

Glint, I appreciate you trying to help, but assumptions are no good for anyone. The only ''rough'' spacer I made was the first one. I made one for Lt. Stefan, and I made a wooden one for myself, and they were both measured out and made very well. Nothing rough about them.


Ah, pardon me. I was only aware of the rough one you made. I wasn't doubting your ability to make them, I just didn't know you had made multiple measured-out and well-made ones.
  • 0
QUOTE

This has spiraled beyond uselessness into utterly stupidy.
- VACC
Read it again until you figure it out.

#19 TantumBull

TantumBull

    Member

  • Moderators
  • 1,929 posts

Posted 14 August 2009 - 10:13 PM

Out of curiosity, did you find that the center points of the holes were usually a nice and easy number of inches away from the center axis point? When I designed my 2K spacers, I found that the center points for the holes were exactly .5" away from the center axis point. I was just wondering if this was true for all of the nerf turrets.

Also, do you think you could tell me how far the center points of the holes are from the center axis point on the 1.5K spacers so I can make a spacer in CAD? I don't have access to calipers right now.
  • 0

#20 Ryan201821

Ryan201821

    Prince Edward

  • Contributors
  • 1,892 posts

Posted 15 August 2009 - 01:03 PM

For the 2k turret, I also get 1/2" in between the center of the turret and the center of the holes for the barrels.

And for the 1500 turret, I got the same measurement as Bob did, 45/64".

As for the CAD drawings, don't bother, it's been already done. Download Here.
All these measurements were done with digital calipers.
  • 0

#21 nerfboi

nerfboi

    Member

  • Members
  • 858 posts

Posted 15 August 2009 - 11:32 PM

I'm pretty sure it was oodalumps with his RF20.

I'm pretty sure it was KBaker or what ever his name is.
  • 0
We Ride together, we die together, Bad boys for life.

#22 Lt Stefan

Lt Stefan

    Member

  • Members
  • 892 posts

Posted 21 August 2009 - 01:35 PM

Do you think you could make an at3k barrel spacer? And is there a drill bit that is the exact OD of petg?
  • 0

#23 Ryan201821

Ryan201821

    Prince Edward

  • Contributors
  • 1,892 posts

Posted 21 August 2009 - 02:04 PM

Do you think you could make an at3k barrel spacer? And is there a drill bit that is the exact OD of petg?

There's a thread in the trading section for that, either that, or just pm me.
  • 0

#24 Lt Stefan

Lt Stefan

    Member

  • Members
  • 892 posts

Posted 21 August 2009 - 10:10 PM

I know the dimension. I just wanted to know if there is some special drill bit you could use for .572. it's a iittle bigger than a 9/16" drill bit, and a little smaller than 19/32. However, I've never seen a drill bit that big come in increments smaller than 1/16.
  • 0

#25 umpshaplapa

umpshaplapa

    Member

  • Members
  • 636 posts

Posted 21 August 2009 - 10:20 PM

I know the dimension. I just wanted to know if there is some special drill bit you could use for .572. it's a iittle bigger than a 9/16" drill bit, and a little smaller than 19/32. However, I've never seen a drill bit that big come in increments smaller than 1/16.

I believe he said he used a 9/16" bit and then just carefully filed it out until it fit.
  • 0
QUOTE(Talio @ Jun 29 2009, 01:50 PM) View Post

i got a black belt in noob banning in 2004.



0 user(s) are reading this topic

0 members, 0 guests, 0 anonymous users