Thanks to split who has also first posted the triple barrel.
My mod is very simple and clean.
What you'll need (double barrel)
1/4" stainless thick rod, 5" long
1/4" thick base wood
2 mavericks
1st Get your maverick and cut out according to the picture below
![Posted Image](http://i567.photobucket.com/albums/ss117/dim3nerf/DSC06830.jpg)
2nd, Drill a 1/4" hole, 1 1/2" from the rotating gear. And same on the opposite side. As shown.
Photobucket
Photobucket
3rd, with your 1'4 inch thick base wood. plot and cut according to diagram below
![Posted Image](http://i567.photobucket.com/albums/ss117/dim3nerf/Picture9.png)
Then cut out the screw wings
![Posted Image](http://i567.photobucket.com/albums/ss117/dim3nerf/DSC06834.jpg)
![Posted Image](http://i567.photobucket.com/albums/ss117/dim3nerf/DSC06831.jpg)
Then assemble
![Posted Image](http://i567.photobucket.com/albums/ss117/dim3nerf/DSC06839.jpg)
![Posted Image](http://i567.photobucket.com/albums/ss117/dim3nerf/DSC06840.jpg)
![Posted Image](http://i567.photobucket.com/albums/ss117/dim3nerf/DSC06829.jpg)
Now your done with the double mav.
The triple maverick
You'll need
1/4" threaded rod
1/4"bolts
3 mavericks
1/8" thick styrene
Just follow these pictures.
![Posted Image](http://i567.photobucket.com/albums/ss117/dim3nerf/DSC06805.jpg)
![Posted Image](http://i567.photobucket.com/albums/ss117/dim3nerf/DSC06806.jpg)
![Posted Image](http://i567.photobucket.com/albums/ss117/dim3nerf/DSC06807.jpg)
![Posted Image](http://i567.photobucket.com/albums/ss117/dim3nerf/DSC06808.jpg)
![Posted Image](http://i567.photobucket.com/albums/ss117/dim3nerf/DSC06810.jpg)
![Posted Image](http://i567.photobucket.com/albums/ss117/dim3nerf/DSC06811.jpg)
i used a different material for the triple barrel coz its easier to use, lighter weight and easy to mod.
i keep my mods simple.
Edited by dim3, 23 July 2009 - 08:12 PM.