47 replies to this topic

[dragonfire9999]

this is only the first part of the description I will add more later when i have more time and can use my nicer camera. description is in the video. just click on the link

http://s822.photobuc...nt=dc85d46d.pbr



And in response to Lt. Stefan, Salmon, possemhunter, nerfer13, and SonReeceSonJensen:

I took out the air restrictors on all of the attached guns, and took out the air restrictors on the longshot, but the longshot's restrictors were some of the first ones I did a long time ago (and since i didn't know there were instructions for how to do it) I kinda F'd up its air restrictors. However, on all of the attached guns I did a really nice job and took alot of care into them.

As far as ranges go, the longshot doesn't go far because of its f'd up air restrictors and only goes about 50ft. max.

The attached guns:

DTB: 40-50 ft.
The 5 attached eliminators: 30-40 ft.

The spray is pretty tight, when all the 7 darts are fired, they spray in about a 3-4 ft. wide and 2-3 ft. tall area (at a range of 20-30 ft. from the target)

Edited by dragonfire9999, 08 August 2009 - 04:19 PM.

[randomnerfninja]

That is the ugliest piece of plastic i have ever seen.

[wardrive]

Not the cleanest job ever, but still pretty impressive. I look forward to reading the updated thread.

[nerfer13]

not the ugliest ive seen but not the best either but very well done, ranges?

Edited by nerfer13, 18 June 2009 - 01:20 PM.

[berserker]

this is only the first part of the description I will add more later when i have more time and can use my nicer camera. description is in the video. just click the picture below

-Don't bother posting unless you actually have the time and content to make it worth the bandwidth and our time. Instead of "here's some crap to look at because I have no time" take the time and compose a readable thread/writeup. At the most this should've gone in the Paintjobs and Modifications thread.
-Try using the Shift key once in a while.
-Your video link is broken.
-There have been much cleaner Longshot - DTG integrations. Longshot DTG Integration

And what in god's name required you to use so much fucking duct tape?

[Knud-Hansen]

I want to see Chubbs and this thing duke it out

[SonReeceSonJensen]

3 Eliminators?!?!? Hella points for excess, I love it!

[atomatron]

Reminds me of the banner for nerfonline...

[nerfer13]

That is the ugliest piece of plastic i have ever seen.

i would look again because michael jackson doesnt look any prettier




ps it actualy looks pretty cool like with the eliminaters but what is the use of flipping the stock upside down

[Possemhunter]

Ohh my gosh........... That is scary. You could win a nerf war just by showing that thing to the other team. Plus they can't tell where on earth your actually aiming it. Ranges? It also looks a bit front heavy. As long as it's functional, good job. Just try to make future mods a tiny bit cleaner.

[Lt Stefan]

-Don't bother posting unless you actually have the time and content to make it worth the bandwidth and our time. Instead of "here's some crap to look at because I have no time" take the time and compose a readable thread/writeup. At the most this should've gone in the Paintjobs and Modifications thread.
-Try using the Shift key once in a while.
-Your video link is broken.
-There have been much cleaner Longshot - DTG integrations. Longshot DTG Integration

Who gave you the authority to tell him what he can and can't do?

Well I will say this, I have no idea what that gun does. Can you explain how it works?

[anon-dude]

It looks like a load of crap to me...

(I know I'm gonna get flamed for this...)

[aishihigeo]

"Next time someone says your mod isn't clean tell them their Mom isn't either and you have the blood test to prove it!"~Talio
Whatever suits your playing style. If your having fun with it, then go out and play, thats what nerf is all about.

[Salmon]

Reminds me of the banner for nerfonline...

Hahaha, seconded.
Anyway, dragonfire, nice mod. The only complaint I have is that the three extra shots of the Eliminators might not be worth it in the long run since they partially disable your aiming capabilities and make the gun bulkier than necessary. I recommend integrating some trusty ol' SMDTGs if you can find 'em. It'll give you better range than the Eliminators, it'll be less bulky, and it'll have a better triggering method too. Also, don't let anybody get you down about your guns not being "clean." If it works, it works, and that's all you should care about.

Welcome to the 'Haven.
~Salmon

[white moonlight]

This isn't clean by any means.

It also doesn't deserve it's own thread, until you add more.

Next time post in the modification paintjobs thread, (if that).

[dragonfire9999]

That is the ugliest piece of plastic i have ever seen.

i would look again because michael jackson doesnt look any prettier




ps it actualy looks pretty cool like with the eliminaters but what is the use of flipping the stock upside down

Which stock?

[anon-dude]

Whatever suits your playing style. If your having fun with it, then go out and play, thats what nerf is all about.

I guess your right.

[dragonfire9999]

In response to Lt. Stefan, Salmon, possemhunter, nerfer13, and SonReeceSonJensen:

I took out the air restrictors on all of the attached guns, and took out the air restrictors on the longshot, but the longshot's restrictors were some of the first ones I did a long time ago (and since i didn't know there were instructions for how to do it) I kinda F'd up its air restrictors. However, on all of the attached guns I did a really nice job and took alot of care into them.

As far as ranges go, the longshot doesn't go far because of its f'd up air restrictors and only goes about 50ft. max.

The attached guns:

DTB: 40-50 ft.
The 5 attached eliminators: 30-40 ft.

The spray is pretty tight, when all the 7 darts are fired, they spray in about a 3-4 ft. wide and 2-3 ft. tall area (at a range of 20-30 ft. from the target)

[nerfer63]

Just wondering what all the duct tape and wires are for? This looks like a clusterfuck of some sort. But heh what ever works for you.

[berserker]

Who gave you the authority to tell him what he can and can't do?

Nobody. Those were suggestions in response to his previously uneditted post quality.

On topic, is the DTG fire-control integrated into the LS trigger or is it ring-fired?

Edited by berserker, 18 June 2009 - 06:23 PM.

[dragonfire9999]

Who gave you the authority to tell him what he can and can't do?

Nobody. Those were suggestions in response to his previously uneditted post quality.

On topic, is the DTG fire-control integrated into the LS trigger or is it ring-fired?

First off, you insulted me and are now asking questions?
Also, you only have 5 posts, don't walk around like you own the place (and yes I know that I'm new too)
However, you did ask a reasonable question, so i'll answer it.
I did not do an internals mod to the trigger, even though i know that it would have been th better idea, I did the key ring because I had troubles at first with the LS trigger integration. I needed to get the mod done quick for a big nerf war with my friends and so I went with the keyring, and now that the gun is unopenable I'm not going to go back and try to change it.

[SonReeceSonJensen]

The 5 attached eliminators: 30-40 ft.


?!?!?!?!?

Ok, I need to see a front view pic of this beast because that just tickles my nerd-fancy. It’s like a Chimera and a Manticor double-teamed a Liger.

[Norther of Heaven]

..... what the fuck is wrong with you?

[guardian21]

It’s like a Chimera and a Manticor double-teamed a Liger.

That was wonderful and mind raping!


On topic:

So all of the eliminators and the DTG are all connected to one trigger? Its rather hard to see from the picture
Also, Why flip the stock? Is that just personal preference or is there a functional reason?

[chefdave]

You'd probably be better off duct taping 9 salvo chambers together.