3 replies to this topic

[princexbuster]

So a couple months ago the trigger to my trusty bbbb broke. I repaired it useing one of these.

Through trial an error i came up with this.
You first drill two holes, one from the front of the trigger and one from the bottom for the hook to come up through. It takes a little feness the get the hook through the hole but it should go.

The cutting down on the trigger made it so i couldn't use the return spring. My solution was a cut up hair tie (i have long hair) strung through a gole drilled in the side of the trigger and then glued in a way so it makes the trigger return. Also it would be better to use super glue.
Anyway, the new trigger (being made of metal) wont break and takes alot more stress.
The only downside, it now breaks here.

I need to fix this but im pretty much stumped. The only thing I can think of is maybe a small eye bolt but I dont know if that will hold.

Any suggestions? Questions? Cheesy pickup lines?

Edited by princexbuster, 15 June 2009 - 02:28 PM.

[Renegademilitia15]

Is that the top of a plastic Coat hanger? Nice. Just combine that with this fix, and that should solve your problem, if I read correctly.

[princexbuster]

I forgot about that and its actually a hook you put in pegboard. Im not sure there is enough plastic there for the lbb trigger catch... thing replacement to work propperly.

[princexbuster]

I was originaly going to do your fix bob, but i couldn't find the rest of my trigger.