Something to remove the Air restrictor.
New barrel material.
First open your gun,only the firing part, you don't need the bottom part for this modification.Cut along the black line and then sand it flush with a dremel.
Remove the air restrictor by dremeling with a selected bit..Put your glue of choice to the part that you sanded flush, then add the barrel before it starts drying
You can lube the plunger, add a new spring or give it a paint job.Close the gun, now you're done.The barrel works perfect with stock sonic micro's which is what I
test ranges with.The plunger rod with spring additions is still holding up perfectly.
You better attempt this mod,. I was stung by a bee in the range test. What I'll do for nerf. P.S you can post this and all my mods on your site just credit me.
Edited by tack66, 14 June 2009 - 01:00 PM.