Jump to content


Photo

Easy Titan Mod Good For Newbeis

simple but good mod

6 replies to this topic

#1 shaunsheep

shaunsheep

    Member

  • Members
  • 3 posts

Posted 10 June 2009 - 04:56 AM

note:you doint have to open the gun to do this mod!!!!!!!and u can still shoot the big rocket and a stock darts


first cut out the top of the big barrel
ok now just screw of the big barrel.ok now get a cupler to fit a half inch pvc. hers the hard part so get ur hot glue gun and from the bottem of the big barrel put the big side of the cupler in first and glue it just above the screw part it might be hard u well get it now drill out ar of the gun and ther u go a good 150ft rang gut that can shoot both ammo note:the rocet will [u]NOT[b]get 150ft
sryno pics hopeu do it and this is my first mod on nerfhavn
  • 0

#2 pjotrkuh

pjotrkuh

    Member

  • Members
  • 259 posts
  • Location:'S-Hertogenbosch, The Netherlands
  • Country:Netherlands

Posted 10 June 2009 - 07:34 AM

note:you doint have to open the gun to do this mod!!!!!!!and u can still shoot the big rocket and a stock darts


first cut out the top of the big barrel
ok now just screw of the big barrel.ok now get a cupler to fit a half inch pvc. hers the hard part so get ur hot glue gun and from the bottem of the big barrel put the big side of the cupler in first and glue it just above the screw part it might be hard u well get it now drill out ar of the gun and ther u go a good 150ft rang gut that can shoot both ammo note:the rocet will [u]NOT[b]get 150ft
sryno pics hopeu do it and this is my first mod on nerfhavn


did you lose the . button somewhere or what? take some valium to slow down and actually use dots. and your mod is way old i believe.....
  • 0
When the shit hits the fan, you'd better wear a rain coat.....

#3 xtremejumpy

xtremejumpy

    Member

  • Members
  • 299 posts
  • Location:Huntsville, AL

Posted 10 June 2009 - 09:27 AM

did you lose the . button somewhere or what? take some valium to slow down and actually use dots. and your mod is way old i believe..... -pjotrkuh

Probably his mind and his membership
  • 0

#4 CaptainSlug

CaptainSlug

    Resident Mad Scientist

  • Administrators
  • 4,761 posts

Posted 10 June 2009 - 09:54 AM

note:you doint have to open the gun to do this mod!!!!!!!and u can still shoot the big rocket and a stock darts


first cut out the top of the big barrel
ok now just screw of the big barrel.ok now get a cupler to fit a half inch pvc. hers the hard part so get ur hot glue gun and from the bottem of the big barrel put the big side of the cupler in first and glue it just above the screw part it might be hard u well get it now drill out ar of the gun and ther u go a good 150ft rang gut that can shoot both ammo note:the rocet will [u]NOT[b]get 150ft
sryno pics hopeu do it and this is my first mod on nerfhavn

Your post quality is unacceptable. Correct it immediately to be in compliance with the board rules.
http://nerfhaven.com...?act=boardrules
Any further posts as terrible as this one and you will be suspended.

Edited by CaptainSlug, 10 June 2009 - 09:56 AM.

  • 0
The little critters of nature, they don't know that they're ugly. That's very funny, a fly marrying a bumble bee. I told you I'd shoot, but you didn't believe me. Why didn't you believe me?

#5 Forgottenboomer

Forgottenboomer

    Member

  • Members
  • 11 posts

Posted 12 June 2009 - 11:12 PM

That helped me mod my titan. Thanks.

Edited by Forgottenboomer, 13 June 2009 - 09:59 PM.

  • 0

#6 ilzot

ilzot

    Member

  • Members
  • 286 posts

Posted 13 June 2009 - 11:16 AM

In case anyone is interested in doing this, I'll fix it up for shaunsheep.

-------------------------------------------------------------------------------------------------------------------------

Note: You don't have to open the gun to do this mod! You can still shoot the missile, but now you can also shoot micro darts and stefans.


Step 1 -Cut off the top of the main barrel.

Step 2 - Screw off the main barrel

Step 3 - Get a 1/2" PVC coupler.

Step 4 - Here's the difficult part of this writeup, so be careful. Get your hot glue gun and adhere the larger side of the coupler to the nozzle that the main barrel screws onto.

Step 5 - Grab your drill and drill out air restrictor of the gun.

FINISHED!

There you go! A good, 150' range Titan that can shoot both the missile and stock micros and stefans.


Note - The missile will NOTget 150'.

Sorry about there being no pictures. Also, this is my first write-up on NerfHaven.

------------------------------------------------------------------------------------------------------------------------

Pictures still would have helped, and it is kind of unclear. But I tried to make it understandable.
  • 0
QUOTE(Vinnie D. @ Feb 1 2010, 05:28 AM) View Post

... to be able to get a better burst or sustained fire, rather than blowing the whole load at once.


#7 Lt Stefan

Lt Stefan

    Member

  • Members
  • 892 posts
  • Location:Hunterdon County, NJ
  • State:New Jersey
  • Country:United States

Posted 13 June 2009 - 11:44 AM

So is the coupler supposed to be glued onto the orange threads on the gun? Because the missile barrel's threads will NOT fit over a 1/2" pvc coupler. You should wrap the coupler in e-tape, put the coupler in the big barrel, push it all the way to the base and then find some way to glue it.
  • 0


0 user(s) are reading this topic

0 members, 0 guests, 0 anonymous users