To do this mod you will need:
A double shot
Pliers
1/2 pvc
1/2 cpvc
Pvc cutter or a hacksaw
and finialy a mallet or a hammer.
(you will not need shells)
1.First you will need a double shot.
![Posted Image](http://i719.photobucket.com/albums/ww200/dylan938/047.jpg)
2. Now this is optional but if you want, take any type of saw and saw off the top or the barrel and make a sawed off shotgun
![Posted Image](http://i719.photobucket.com/albums/ww200/dylan938/048.jpg)
3.Take the little orange piece and the spring that Makes the shell eject, out with your pliers. (note this isn't the ejection spring, it is the normal spring I just couldn't find the ejection one
![:unsure:](http://nerfhaven.com/forums/public/style_emoticons/default/biggrin.gif)
![Posted Image](http://i719.photobucket.com/albums/ww200/dylan938/056.jpg)
4. Now cut your pvc and cpvc 1 inch in length. (It has to be 1 inch)
![Posted Image](http://i719.photobucket.com/albums/ww200/dylan938/061.jpg)
5. Now hammer your cpvc in the pvc( this will be hard) until it looks like this (the inside of the black is the cpvc)
![Posted Image](http://i719.photobucket.com/albums/ww200/dylan938/062.jpg)
6. repeat this prosess again.
7 Insert your new shells into gun.
![Posted Image](http://i719.photobucket.com/albums/ww200/dylan938/064.jpg)
And now you have yourself a nice rear loading double shot