14 replies to this topic

[skrue luse]

Just a little something I threw together in a fit of boredom. Turned out pretty good.
So, without further preamble, my first mod on these forums. Hope you enjoy!

What you need:

Non-blowback CO2 BB or airsoft pistol. (I used a Tippman T-400)
E-Tape.
Duct tape
Hot glue or adhesive of choice. (I didn't use any because mine os a temporary rig)
Enough 1/2" schedule 40 PVC to hold a dart.


Step One:
Wrap a couple of layers of e-tape around the muzzle so the PVC fits.


Step Two:
Slide the PVC into place. This is when you'd use the adhesive to make it permenant.


Step Three:
For a temp job, add a little duct tape to stabalize the PVC.


Steps Four and five:
Cover w/ e-tape for cosmetics and add a bright tip for safety.


Total time: 10 min.
Avg. Range: 70' w/ no cocking or pumping. Origional pistol fired @ 350fps

What do you guys think?

[stuck by stefan]

Don't take that to a nerf war.

[skrue luse]

Don't take that to a nerf war.

I don't do nerf wars, mainly because there aren't any closer than 200 miles. I mod nerf guns and make other foam weapons (swords, axes, etc..) for LARPs and a couple of assassination games in my area.

[jackster57]

Don't take that to a nerf war.

Or just give it a bright orange tip and paint it a different color...

On topic- Nice job, while it would sort of be a pain to keep changing the co2 cartridge after every few rounds, it is still pretty cool. If I were you I would install a deodorant clip system like FA24 did on his BBB.

[ninja mods]

[/quote]

Or just give it a bright orange tip and paint it a different color...

[/quote]

Why would you paint it differently????? it looks sweet now.

[TheDisciple]

Or just give it a bright orange tip and paint it a different color...

Why would you paint it differently????? it looks sweet now.

Legality, It could be mistaken for a real gun, and when armed cops show up you could be in a bit of trouble.

[cheesypiza001]

Don't take that to a nerf war.

Or just give it a bright orange tip and paint it a different color...

On topic- Nice job, while it would sort of be a pain to keep changing the co2 cartridge after every few rounds, it is still pretty cool. If I were you I would install a deodorant clip system like FA24 did on his BBB.

The priming stroke is the opposite for the BBB and this gun if you know what I mean.

[PointBlank]

That must be a fairly powerful airsoft gun to reach that kind of range, most airsoft guns have even smaller air capacity than that of the nf. Are those ranges flat or angled?

[skrue luse]

Jackster 57:
The CO2 cylinder is good for 100+ shots. I'm also toying with the idea of doing a Mav integration.

PointBlank:
The Tippman T-400 is a fairly strong pistol @ 350 fps, which is double most common spring pistols and almost triple what many electric pistols produce.

The shots had a slight angle, maybe 3-5 degrees.

Ninja mods:
As is, the gun's pj is only good for closed site LARPs. Even the local assassination games require pjs that scream "not a real weapon".

Edited by skrue_luse, 28 March 2009 - 01:31 PM.

[Magic]

I did the same thing a few months ago in this thread. Mine was getting about 10 feet less, but I also had a few inches of PETG on mine with loose darts.

[skrue luse]

I did the same thing a few months ago in this thread. Mine was getting about 10 feet less, but I also had a few inches of PETG on mine with loose darts.

Sweet. I'd missed that one or I wouldn't have posted mine.

[PointBlank]

Edit: Nevermind, my question was already answered.

Edited by PointBlank, 28 March 2009 - 06:46 PM.

[NerfCrazy]

Jackster 57:
The CO2 cylinder is good for 100+ shots.

[fullmetalgir]

Don't take that to a nerf war.

I don't do nerf wars, mainly because there aren't any closer than 200 miles. I mod nerf guns and make other foam weapons (swords, axes, etc..) for LARPs and a couple of assassination games in my area.

what state are you in

[skrue luse]

Don't take that to a nerf war.

I don't do nerf wars, mainly because there aren't any closer than 200 miles. I mod nerf guns and make other foam weapons (swords, axes, etc..) for LARPs and a couple of assassination games in my area.

what state are you in

Middle of nowhere, So. Illinois.