Jump to content


Photo

Quick And Dirty Mod.

70' w/ no pump or springs?

14 replies to this topic

#1 skrue luse

skrue luse

    Member

  • Members
  • 17 posts
  • Location:cleburne, IL

Posted 28 March 2009 - 12:27 AM

Just a little something I threw together in a fit of boredom. Turned out pretty good.
So, without further preamble, my first mod on these forums. Hope you enjoy!

What you need:

Non-blowback CO2 BB or airsoft pistol. (I used a Tippman T-400)
E-Tape.
Duct tape
Hot glue or adhesive of choice. (I didn't use any because mine os a temporary rig)
Enough 1/2" schedule 40 PVC to hold a dart.
Posted Image

Step One:
Wrap a couple of layers of e-tape around the muzzle so the PVC fits.
Posted Image

Step Two:
Slide the PVC into place. This is when you'd use the adhesive to make it permenant.
Posted Image

Step Three:
For a temp job, add a little duct tape to stabalize the PVC.
Posted Image

Steps Four and five:
Cover w/ e-tape for cosmetics and add a bright tip for safety.
Posted Image

Total time: 10 min.
Avg. Range: 70' w/ no cocking or pumping. Origional pistol fired @ 350fps

What do you guys think?
  • 0

#2 stuck by stefan

stuck by stefan

    Member

  • Members
  • 280 posts
  • Location:Maine

Posted 28 March 2009 - 12:31 AM

Don't take that to a nerf war.
  • 0

This is the NerfHaven profile of Northeast Designs. For more info visit https://www.facebook...p8OwIso&fref=nf

Old school Nerf engineer since 2008


#3 skrue luse

skrue luse

    Member

  • Members
  • 17 posts
  • Location:cleburne, IL

Posted 28 March 2009 - 12:45 AM

Don't take that to a nerf war.


I don't do nerf wars, mainly because there aren't any closer than 200 miles. I mod nerf guns and make other foam weapons (swords, axes, etc..) for LARPs and a couple of assassination games in my area.
  • 0

#4 jackster57

jackster57

    Member

  • Members
  • 436 posts
  • Location:Maine

Posted 28 March 2009 - 08:32 AM

Don't take that to a nerf war.


Or just give it a bright orange tip and paint it a different color...

On topic- Nice job, while it would sort of be a pain to keep changing the co2 cartridge after every few rounds, it is still pretty cool. If I were you I would install a deodorant clip system like FA24 did on his BBB.
  • 0

#5 ninja mods

ninja mods

    Member

  • Members
  • 119 posts
  • Location:the state of denial!

Posted 28 March 2009 - 09:33 AM

[/quote]

Or just give it a bright orange tip and paint it a different color...

[/quote]

Why would you paint it differently????? it looks sweet now.
  • 0

#6 TheDisciple

TheDisciple

    Member

  • Members
  • 20 posts
  • Location:Ellicott City, Maryland

Posted 28 March 2009 - 09:35 AM


Or just give it a bright orange tip and paint it a different color...


Why would you paint it differently????? it looks sweet now.



Legality, It could be mistaken for a real gun, and when armed cops show up you could be in a bit of trouble.
  • 0

#7 cheesypiza001

cheesypiza001

    Member

  • Members
  • 752 posts
  • Location:Connecticut

Posted 28 March 2009 - 09:46 AM

Don't take that to a nerf war.


Or just give it a bright orange tip and paint it a different color...

On topic- Nice job, while it would sort of be a pain to keep changing the co2 cartridge after every few rounds, it is still pretty cool. If I were you I would install a deodorant clip system like FA24 did on his BBB.


The priming stroke is the opposite for the BBB and this gun if you know what I mean.
  • 0

#8 PointBlank

PointBlank

    Member

  • Members
  • 528 posts
  • Location:Chicago suburbia

Posted 28 March 2009 - 11:32 AM

That must be a fairly powerful airsoft gun to reach that kind of range, most airsoft guns have even smaller air capacity than that of the nf. Are those ranges flat or angled?
  • 0
You can agree with me.... or you can be wrong.

My Latest Mods
The Cyclops
Pointblank Titan

#9 skrue luse

skrue luse

    Member

  • Members
  • 17 posts
  • Location:cleburne, IL

Posted 28 March 2009 - 01:30 PM

Jackster 57:
The CO2 cylinder is good for 100+ shots. I'm also toying with the idea of doing a Mav integration.

PointBlank:
The Tippman T-400 is a fairly strong pistol @ 350 fps, which is double most common spring pistols and almost triple what many electric pistols produce.

The shots had a slight angle, maybe 3-5 degrees.

Ninja mods:
As is, the gun's pj is only good for closed site LARPs. Even the local assassination games require pjs that scream "not a real weapon".

Edited by skrue_luse, 28 March 2009 - 01:31 PM.

  • 0

#10 Magic

Magic

    Formerly NerfOnFier

  • DO NOT TRADE
  • 540 posts
  • Location:Commack, New York

Posted 28 March 2009 - 02:20 PM

I did the same thing a few months ago in this thread. Mine was getting about 10 feet less, but I also had a few inches of PETG on mine with loose darts.
  • 0

#11 skrue luse

skrue luse

    Member

  • Members
  • 17 posts
  • Location:cleburne, IL

Posted 28 March 2009 - 03:28 PM

I did the same thing a few months ago in this thread. Mine was getting about 10 feet less, but I also had a few inches of PETG on mine with loose darts.


Sweet. B) I'd missed that one or I wouldn't have posted mine. :)
  • 0

#12 PointBlank

PointBlank

    Member

  • Members
  • 528 posts
  • Location:Chicago suburbia

Posted 28 March 2009 - 05:37 PM

Edit: Nevermind, my question was already answered.

Edited by PointBlank, 28 March 2009 - 06:46 PM.

  • 0
You can agree with me.... or you can be wrong.

My Latest Mods
The Cyclops
Pointblank Titan

#13 NerfCrazy

NerfCrazy

    Member

  • Members
  • 497 posts
  • Location:Minnesota, 55422

Posted 28 March 2009 - 06:27 PM

Jackster 57:
The CO2 cylinder is good for 100+ shots.


  • 0

#14 fullmetalgir

fullmetalgir

    Member

  • Members
  • 12 posts
  • Location:alabama

Posted 29 March 2009 - 04:43 PM

Don't take that to a nerf war.


I don't do nerf wars, mainly because there aren't any closer than 200 miles. I mod nerf guns and make other foam weapons (swords, axes, etc..) for LARPs and a couple of assassination games in my area.


what state are you in
  • 0

#15 skrue luse

skrue luse

    Member

  • Members
  • 17 posts
  • Location:cleburne, IL

Posted 29 March 2009 - 10:17 PM

Don't take that to a nerf war.


I don't do nerf wars, mainly because there aren't any closer than 200 miles. I mod nerf guns and make other foam weapons (swords, axes, etc..) for LARPs and a couple of assassination games in my area.


what state are you in


Middle of nowhere, So. Illinois.
  • 0


0 user(s) are reading this topic

0 members, 0 guests, 0 anonymous users