I should note that the brass is 1 foot long, and is made by KS.
Edited by Mehku, 20 March 2009 - 10:19 PM.
Posted 20 March 2009 - 08:57 PM
Edited by Mehku, 20 March 2009 - 10:19 PM.
Posted 20 March 2009 - 09:06 PM
Posted 20 March 2009 - 09:58 PM
That wouldn't explain the wild fluctuation in range. Can you think of anything that is different when you get better or worse ranges?The brass could be moving it happend to me. Also check the seal.
Posted 20 March 2009 - 10:05 PM
Edited by TantumBull, 20 March 2009 - 10:12 PM.
Posted 20 March 2009 - 10:08 PM
That wouldn't explain the wild fluctuation in range. Can you think of anything that is different when you get better or worse ranges?The brass could be moving it happend to me. Also check the seal.
Edited by Mehku, 20 March 2009 - 10:18 PM.
Posted 20 March 2009 - 11:14 PM
Edited by TantumBull, 20 March 2009 - 11:15 PM.
Posted 20 March 2009 - 11:48 PM
That wouldn't explain the wild fluctuation in range.The brass could be moving it happend to me. Also check the seal.
Posted 21 March 2009 - 02:28 PM
Okay. Some things are going to need to change if you want better performance
1) Put either a segment of 17/32 in or just a whole foot. You need a tighter barrel for step 2...
2) Put a ring of craft foam on the bolt where it touches the brass. Make it big enough so a dart cannot enter the bolt. This will also help with the seal. You need the tighter fitting brass because nerf darts don't do well in 9/16. The reason you're set up sometimes worked earlier is because the dart sometimes went into the bolt.
A word of warning: I did something very similar to option one. It ended up failing because of the seal between the barrel and the bolt. I could've pulled it off now, but this was last summer. I sucked at modding. Try option two if you're worried about this. A little while ago I just brass breech'd it. Performs wonderfully now.
Edited by Mehku, 21 March 2009 - 02:30 PM.
Posted 21 March 2009 - 03:57 PM
Posted 21 March 2009 - 04:10 PM
Edited by Mehku, 21 March 2009 - 04:10 PM.
Posted 21 March 2009 - 04:26 PM
Posted 21 March 2009 - 10:33 PM
I guess my last post was wrong. Here's what bpso did. Basically just did what you did except he cut a hole in the barrel to accommodate the dart tooth.
0 members, 1 guests, 0 anonymous users