So, take a bit of your strongest, on hand wire. It should be about 1/16 - 1/8". Cut it at around 12". Fold it in half at the middle. Slide a keyring on the end (where it was folded) and twist the wire.
![Posted Image](http://i271.photobucket.com/albums/jj129/icetyrant22/Photo709.jpg)
Take a hand drill or dremel and poke 2 small holes through the back end of the plunger.
![Posted Image](http://i271.photobucket.com/albums/jj129/icetyrant22/Photo710.jpg)
![Posted Image](http://i271.photobucket.com/albums/jj129/icetyrant22/Photo711.jpg)
Thread the two ends of your wire through these holes.
![Posted Image](http://i271.photobucket.com/albums/jj129/icetyrant22/Photo712.jpg)
Hotglue these wires down. Be generous with the glue.
![Posted Image](http://i271.photobucket.com/albums/jj129/icetyrant22/Photo713.jpg)
Fill the top half with plunbers goop and wait overnight. Once dry, then fill what remains with a heap of hotglue.
![Posted Image](http://i271.photobucket.com/albums/jj129/icetyrant22/Photo714.jpg)
Drill a small whole in your stock and back half of your shell. Thread the wire though, and your done!
![Posted Image](http://i271.photobucket.com/albums/jj129/icetyrant22/Photo716.jpg)
Link
Edited by ice, 23 March 2009 - 04:42 PM.