At2k Stock V2
A very small list of Supplies:
1/2 in. CPVC
one 1/2 in. CPVC Coupler
First, cut a hole in the back of your at2k. Be very careful, because there is some tubing right behind the hole were you are cutting. Like this:
(Picture from old write-up)
Then cut a small peice of CPVC, and stick in the aforementioned hole, and apply Amazing Goop profusely. Make sure the piece is long enough to fit a coupler securely on the back. Like so:
Then, take your coupler and glue it on to the front of the metal pipe protruding from the crutch. Then for aesthetics, I glued a crossbar of CPVC to make it look sweet.
When you've done all of that^^, it should look like this:
The stock should securely fit on the the back of the at2k, and It also shouldn't be that hard to get off.
With all the comfiness of the crutch stock, and the versatility of the PVC removable stock.
Edit: Hotglue is shit.
Edited by Renegademilitia15, 20 July 2010 - 11:56 PM.