14 replies to this topic

[uche-uche]

it is made by ruff stuff and Is called the tek ten. It shoots 10 darts semi-auto cocking about 20 ft straight. It is no bigger than a fastblast.It comes with a target.there are 4 other guns in the line, The Teksix,twin tek(includes 2 pistols),theLightning strike disc shooter, and the Lightning strike ball blaster.Im notsure if anybody else has seen these but i didnt see a topic so i made one.PICS COMING SOON

[Nazgul Lord]

Ge the pics!!! Hurry!!

[Grinch]

it is made by ruff stuff and Is called the tek ten. It shoots 10 darts semi-auto cocking about 20 ft straight. It is no bigger than a fastblast.It comes with a target.there are 4 other guns in the line, The Teksix,twin tek(includes 2 pistols),theLightning strike disc shooter, and the Lightning strike ball blaster.Im notsure if anybody else has seen these but i didnt see a topic so i made one.PICS COMING SOON

Like I said on NerfHQ, these guns are nothing new. Jangadance already made a topic about it.

http://www.nerfhq.co...opic.php?t=4437

[Jangadance]

Twin Tek pistols: Talio tried these out, hasn't modded them yet.
Tek 6: it's a SM250/SM350 or AT1k
Tek 10: interested in hearing ranges and especially spring/plunger sizes
Disc Shooter: your average foam disc shooter...
Ball Blaster: your average ball blaster, like the Reactor

Both of the Lightning Strike guns do feature cheap camera flash-like lightbulbs.

[uche-uche]

do you know if there are any mods for the tek10

[Jangadance]

Open it up and find out. If you need help, measure the spring and plunger tube and report back to us.

[vuko44]

Where can you buy the Tek guns?

[Oroku Saki]

The ones that I found were at my local K-mart. You may be able to find them at other retail outlets.

[jpshyboi9]

send me a picture of it anybady lovinlfiesjoh32@netscape.net

[uche-uche]

i opened it up and i put some 1/2 inch cpvc down the barrels(had to hit with hammer) but now i am having trouble getting it to shoot. If i gat it working i will report back to you. Also the spring size is close to the size of a nite finder. But I am not sure if I should take out the small rubber thing that is at the end of the plunger tube. It muffles the sound but it also looks like it greatly reduces the airflow. If you have any suggestions tell me because this is probably will end up being a destroyed gun but we will soon find out.

Edited by uche-uche, 12 February 2004 - 05:23 PM.

[vuko44]

I bought a set of the tek pistols at kmart and they seem really promising. I opened one up to find a heavy-duty spring, a great seal on the plunger, and the whole thing was well lubed (ha...lubed). I am probably for now going to add a marker barrel to see how wistling micros work.

The drawback to this gun is that it seems to be made for small hands. The trigger is just a little to small for a comfortable grip.

At ten bucks, these are a good deal. Plus, they are pretty simple so it would be hard to screw them up.

[uche-uche]

i single barrel modded the tek ten using 1/2 inch cpvc. It shoots about 40-70 ft depending on the dart.I dont think it is possible to multi barrel mod it cause it has to bad of a seal. Hope this helps.

[Jangadance]

Sounds cool, if someone would post pictures that would be nice... most significantly, of the internals, maybe comparing the plunger tube to some other gun if you can. The range would probably be better with nested brass, but how big is the Tek Ten? Pistol sized?

[uche-uche]

the tek ten is about the size of a short fastblast

[UpGraD3]

I saw the tek 6 at TRU today. I also saw the tek ten but didn't get it. I think there from the airzone series, not sure though. What I did buy was a gun in the airzone series, but its a remake of the ultimator basically.