12 replies to this topic

[lambchop]

I finished my modification to my bbbb but when i put the gun back in the shell it will pump but the air wont stay in. But when the gun is out of the shell it works fine. Could some help.

[sputnik]

I finished my modification to my bbbb but when i put the gun back in the shell it will pump but the air wont stay in. But when the gun is out of the shell it works fine. Could some help.

The trigger is being held open by something in the shell.
Check for any obstructions, then try it.

[lambchop]

I hot glued the trigger onto the metal pin cause i gave up on it and decided to use it without the shell. But it worked with the hot glue on it outside of the shell.

Edited by lambchop, 17 February 2009 - 03:35 PM.

[sputnik]

I hot glued the trigger onto the metal pin cause i gave up on it and decided to use it without the shell. But it worked with the hot glue on it outside of the shell.

The trigger is crooked on the pin then..

When the shell is closed, it causes the pin to tilt to one side, making it leak.


Try removing the hot glue.

[lambchop]

I hot glued the trigger onto the metal pin cause i gave up on it and decided to use it without the shell. But it worked with the hot glue on it outside of the shell.

The trigger is crooked on the pin then..

When the shell is closed, it causes the pin to tilt to one side, making it leak.


Try removing the hot glue.

Ok i am trying it right now

[twenty4]

Same thing happened to me.

What you have to do is glue the tank as far back in the shell as you can.

[Glint]

You might have the trigger sticking up the wrong place. THere are three little bars that connect the body or the air tank. Make sure the trigger goes inbetween the right one (the biggest one).

[lambchop]

What do you mean by glueing the tank back.

[twenty4]

Just glue the tank down.

[Glint]

I wouldn't recomend glueing the tank in. Then it's not possible to work on it if you ever need to do anythign else. On top of that, it should work without gluing them down so it's quite pointless and wouldn't really help with anything.

[lambchop]

Twenty i owe this whole mod/gun to you thank you very much.

[twenty4]

Thanks. And your welcome.

Edited by twenty4, 17 February 2009 - 04:49 PM.

[iM ThAT Kid]

Just get the hot glue off and im pretty sure it will work.