I'm having a little spot of trouble modding a mav for my friend.
I removed all of the AR parts, and I have a pretty good seal with the turret, but when I cock it and fire, the dart doesn't leave the barrel.
So when you do an AR removal to your Mav, do you remove the three pronged thingy's and the spring, but leave the pegs in with them drilled out?
Thanks.
3 replies to this topic
#1
Renegademilitia15
-
- Members
- 516 posts
Member
Posted 15 February 2009 - 04:36 AM
Singled RFS
FA_24's response to Ice's back pain thread:
I used to have that problem until I got circumcised. 15 pounds later I was able to stand up straight.
FA_24's response to Ice's back pain thread:
QUOTE
I used to have that problem until I got circumcised. 15 pounds later I was able to stand up straight.
#2
slienced assassin
-
- Members
- 66 posts
Member
Posted 15 February 2009 - 09:08 AM
You need to keep in the ring part of the air restrictor. Just remove the peg sticking out of it.
92% of teens have moved on to rap.
If you are part of the 8% who still listen to "real music",
copy and paste this into your signature
http://supernerf.piczo.com/?cr=1
If you are part of the 8% who still listen to "real music",
copy and paste this into your signature
http://supernerf.piczo.com/?cr=1
#3
Renegademilitia15
-
- Members
- 516 posts
Member
Posted 15 February 2009 - 06:24 PM
Thanks just put it in and everything works. thank you.
Singled RFS
FA_24's response to Ice's back pain thread:
I used to have that problem until I got circumcised. 15 pounds later I was able to stand up straight.
FA_24's response to Ice's back pain thread:
QUOTE
I used to have that problem until I got circumcised. 15 pounds later I was able to stand up straight.
#4
Nerf-O-Matick
-
- Members
- 6 posts
Member
Posted 15 February 2009 - 07:37 PM
Yea...same thing happened to me...The problem is, The ring on the air Restrictor is pushed back too far...So there is a HUGE gap where the air is supposed to flow...lucky for you, you can fix it. But for me, I have to buy a hole new Mav because I cant take it apart because the screws are striped on it... 
0 user(s) are reading this topic
0 members, 0 guests, 0 anonymous users
