I made a deodorant clip for a breach I made, and I'm having trouble loading it. If I try to load a dart it, the weighted side goes straight down. The darts are barely shorter than the card board I have inserted in the clip.
Am I doing something wrong?
7 replies to this topic
#2
Posted 14 February 2009 - 11:33 PM
Am I doing something wrong?
No, you aren't. That is a common problem with D clips.
Edited by TantumBull, 15 February 2009 - 01:09 AM.
#4
Posted 14 February 2009 - 11:54 PM
Not using gravity fed clips is about it.
thaygor: all i remimber is pumping it hard and shooting than trying to pump again
---
<death09>my girlfriend broke up with me and sent me pix of her and her new boyfriend in bed
<ktp753>ouch.
<death09>yeah.i sent them to her dad
---
<death09>my girlfriend broke up with me and sent me pix of her and her new boyfriend in bed
<ktp753>ouch.
<death09>yeah.i sent them to her dad
#5
Posted 15 February 2009 - 12:13 AM
Not using gravity fed clips is about it.
My SFD (spring fed deodorant) clip has the same problem. I'm uploading a vid to youtube right now, and it will be posted in the write up thread.
#6
Posted 15 February 2009 - 01:00 AM
Put a heavily and evenly weighted dart at the top.
You could even probably get away with using a battery.
Constant pressure will help keep them in line.
When I first came up with the deodorant clip I had the same problem.
Jesus, that was like 3 years ago.
Here is a link to see what I am talking about with the weighted dart.
Travel back in time. 3 years ago........
You could even probably get away with using a battery.
Constant pressure will help keep them in line.
When I first came up with the deodorant clip I had the same problem.
Jesus, that was like 3 years ago.
Here is a link to see what I am talking about with the weighted dart.
Travel back in time. 3 years ago........
I don't get my kicks out of you,
I don't feel the way I used to do.
I know its bad,
After what we had,
But I’m just not the angel you knew.
I don't feel the way I used to do.
I know its bad,
After what we had,
But I’m just not the angel you knew.
#7
Posted 15 February 2009 - 01:09 AM
Guys, he's talking about when he's actually loading the darts.
#8
Posted 15 February 2009 - 04:03 AM
Drop them in back end first, that way when they hit the bottom, they set in place?
Thats my solution to a problem I've never faced yet.
Thats my solution to a problem I've never faced yet.
0 user(s) are reading this topic
0 members, 0 guests, 0 anonymous users