Jump to content


Photo

The K9 Special (pas Mod)

The Doomsayer's Replacement

52 replies to this topic

#1 k9turrent

k9turrent

    Member

  • Members
  • 828 posts
  • Location:Brampton, Ontario, Canada

Posted 25 January 2009 - 12:42 PM

At WCNO 2, I had found the usefulness of the RSCB clip when I was pwning Rokor. And at Massacre 2, I was thinking (scary I know) why do people only put the RSCB on springers? So I decided to put it on my PAS while on at Massacre 2 AND diddled WHEN RUSHING!!! Then while waiting for a round to start, FA_24 pointed at my RSCB and stated he hated them for the dead space. And to on the way home Dumpy and I were talking and this is the rough outcome of our speculation.

Goals of this mod:
-replace the Doomsayer in wars that it is banned
-Increase the Rof of the PAS
-Reduce the range loss due the deadspace of the RSCB
-Install a better loading system for the RSCB (the removal of the barrel makes it unstable)

So here is the final product (I know that a good paint job makes the mod, But I live in Canada, soÖ)
Posted Image
Posted Image

The VIDEO


Tools used:
-Hacksaw
-Nailclipper
-wirecutters
-Lighter & Candle + mini screwdriver = drill
-Zip-ties
-superglue
-hotglue gun

First off, do any silencing, and spring addition and all that crap.

Silencing:
Posted Image
(I didnít do any spring addition cause I donítí have any springs)

Then take the brown piece:
Posted Image

And cut flush with the base
Posted Image


Put a small piece of cpvc onto a cpvc elbow and Super glue it in.
Posted Image

Shove some foam into the deadspace.

Posted ImagePosted Image

Edited by k9turrent, 28 January 2009 - 12:04 AM.

  • 0
QUOTE View Post

That's about it. And thanks Angela who helped me with these pictures.. It looks huge in her hands.


HOLY CRAP!

FU ALL

#2 k9turrent

k9turrent

    Member

  • Members
  • 828 posts
  • Location:Brampton, Ontario, Canada

Posted 27 January 2009 - 12:37 PM

Now take this orange piece and cut it down to this.
Posted Image

And trim it down to this.
Posted Image

Cut a small cpvc connection between the elbow and the “T”
Posted Image
Posted Image

Close up the shell and cut off the bottom screw


Now make a simple breech out of brass (I unfortunately dint have any, so I had to use copper and aluminum)
Posted Image

Plug up one end of the breech
Posted Image

Glue on a handle on to the back of the breech.
Posted Image

Cut the Trigger guard and drill a hole to accommodate for a zip-tie.
Posted Image


Cut out the ends of the pump handle and the posts inside, to accommodate for the breech.
Posted Image

Drill holes here for zip-ties and whip out the zip-ties, and put dabs of hot glue on the edges on the edge on handle.
Posted Image

Put your barrel on the end and Ta-Da!!!
Posted Image



ranges: (indoor, down a hallway, using 1 inch stefans, rounded to the nearest foot)
67
73
86
87
87
90
92
97
+100 (It hit the wall at the end hallway)

[Remember I'm only using the stock spring]

Edited by k9turrent, 27 January 2009 - 12:43 PM.

  • 0
QUOTE View Post

That's about it. And thanks Angela who helped me with these pictures.. It looks huge in her hands.


HOLY CRAP!

FU ALL

#3 Knud-Hansen

Knud-Hansen

    Member

  • Members
  • 58 posts
  • Location:Easton, MD

Posted 27 January 2009 - 01:49 PM

Nice work! I really like how you now load it like an actual auto shotgun. If i ever get a hold of a PAS I will certainly be looking over this mod again.
  • 0
[size=4][i]-Knud-

#4 General Nerf

General Nerf

    Member

  • Banned
  • 90 posts

Posted 27 January 2009 - 02:09 PM

This might be stupid and I could use the search function but where do you get that gun ?
AAAAAAAAAHHHHHHHH! I am Rambo Fear me with all your might! ugh nnnnnoooooo I just got shot with a nerf dart! AAAAAAAAHHHHHHHH! eh..eh..help me...

#5 k9turrent

k9turrent

    Member

  • Members
  • 828 posts
  • Location:Brampton, Ontario, Canada

Posted 27 January 2009 - 02:13 PM

KH: Thanks man.

General Nerf: It is the ERTL Pump Action Shotgun, I got it at Bass Pro, but it is also available at Cabella (sp?) Yeah I wouldn't know where else to get in the states
  • 0
QUOTE View Post

That's about it. And thanks Angela who helped me with these pictures.. It looks huge in her hands.


HOLY CRAP!

FU ALL

#6 Draconis

Draconis

    I am not Lord Draconical

  • Members
  • 2,712 posts
  • NerfHaven Subscription Supporter
  • Location:Salem, Oregon
  • State:Oregon
  • Country:United States
  • u/Parabolictoys on Reddit

Posted 27 January 2009 - 02:27 PM

Wow! Nice work K9. What sizes of copper and aluminum are you using? It looks like 1/2" copper, but what about the aluminum? If anyone is interested, it looks like you could do the same type of loading breech with the 5/8" copper repair sleeve that I used in my Bathroom Breech design.
  • 0
[15:51] <+Noodle> titties
[15:51] <+Rhadamanthys> titties
[15:51] <+jakejagan> titties
[15:51] <+Lucian> boobs
[15:51] <+Gears> titties
[15:51] <@Draconis> Titties.
[15:52] <+Noodle> why is this so hard?

#7 k9turrent

k9turrent

    Member

  • Members
  • 828 posts
  • Location:Brampton, Ontario, Canada

Posted 27 January 2009 - 02:55 PM

The copper is 1/2" but the aluminum I found off an old lamppost from ikea. But Like i said in the write-up, I would prefer to have used brass, because I'm not not even getting a perfect seal of the breech.

And I'm almost done editing my video.
  • 0
QUOTE View Post

That's about it. And thanks Angela who helped me with these pictures.. It looks huge in her hands.


HOLY CRAP!

FU ALL

#8 Draconis

Draconis

    I am not Lord Draconical

  • Members
  • 2,712 posts
  • NerfHaven Subscription Supporter
  • Location:Salem, Oregon
  • State:Oregon
  • Country:United States
  • u/Parabolictoys on Reddit

Posted 27 January 2009 - 03:04 PM

The copper is 1/2" but the aluminum I found off an old lamppost from ikea. But Like i said in the write-up, I would prefer to have used brass, because I'm not not even getting a perfect seal of the breech.

And I'm almost done editing my video.



Try one of those repair sleeves. Then you just have to replace that one piece, and you will get a better seal.
  • 0
[15:51] <+Noodle> titties
[15:51] <+Rhadamanthys> titties
[15:51] <+jakejagan> titties
[15:51] <+Lucian> boobs
[15:51] <+Gears> titties
[15:51] <@Draconis> Titties.
[15:52] <+Noodle> why is this so hard?

#9 NerfDude1138

NerfDude1138

    Member

  • Members
  • 114 posts
  • Location:New England

Posted 27 January 2009 - 03:11 PM

Excellent work! Excellent photography as well.

Needs a little paint. :lol:

Edited by NerfDude1138, 27 January 2009 - 10:04 PM.

  • 0
Check out all my mods on FU.

Foam Universe
We are a friendly and rapidly growing Nerfing community.

#10 mystefansdontflystraight

mystefansdontflystraight

    Member

  • Members
  • 1,176 posts
  • Location:Toronto, Canada

Posted 27 January 2009 - 03:30 PM

Im doing this. Like this weekend. I can't wait to see that thing at the next war.
  • 0
QUOTE(Blacksunshine @ Dec 24 2009, 02:15 PM) View Post

QUOTE(white moonlight @ Dec 23 2009, 01:29 PM) View Post

It's just screaming to be rearloading...

I seen a movie about that once.



#11 sputnik

sputnik

    Member

  • Members
  • 911 posts
  • Location:San Angelo, Texas

Posted 27 January 2009 - 03:54 PM

So when you cock the gun, the breech opens?

Maybe I'm not getting something, but how is it a RSCB?

That video would be much appreciated sir.
  • 0
tcambre on IRC.

<3

#12 slowguitarman

slowguitarman

    Member

  • Members
  • 1,113 posts
  • Location:Denver, WV

Posted 27 January 2009 - 04:04 PM

So when you cock the gun, the breech opens?

Maybe I'm not getting something, but how is it a RSCB?

That video would be much appreciated sir.


You open the breech, load the darts, close the breech, prime the gun, shoot. The breech is separate from the pump, unless I am mistaken.
  • 0
QUOTE
Your dreams were tight like a baby

SGM's Shred Shop -Mod Service

NerfHaven's resident drama queen.

#13 k9turrent

k9turrent

    Member

  • Members
  • 828 posts
  • Location:Brampton, Ontario, Canada

Posted 27 January 2009 - 04:13 PM

Double post

Edited by k9turrent, 27 January 2009 - 04:42 PM.

  • 0
QUOTE View Post

That's about it. And thanks Angela who helped me with these pictures.. It looks huge in her hands.


HOLY CRAP!

FU ALL

#14 k9turrent

k9turrent

    Member

  • Members
  • 828 posts
  • Location:Brampton, Ontario, Canada

Posted 27 January 2009 - 04:43 PM

THE VIDEO IS NOW MEGAVIDEO!!!
  • 0
QUOTE View Post

That's about it. And thanks Angela who helped me with these pictures.. It looks huge in her hands.


HOLY CRAP!

FU ALL

#15 slienced assassin

slienced assassin

    Member

  • Members
  • 66 posts

Posted 27 January 2009 - 04:48 PM

Awsome gun. I wish I had a pas. That is a pretty good video too.
  • 0
92% of teens have moved on to rap.
If you are part of the 8% who still listen to "real music",
copy and paste this into your signature

http://supernerf.piczo.com/?cr=1

#16 k9turrent

k9turrent

    Member

  • Members
  • 828 posts
  • Location:Brampton, Ontario, Canada

Posted 27 January 2009 - 05:00 PM

Operating note: For me, this gun is optimized for ROF, I have to hold at waist-height. Cause I made this gun is to support my lack of accuracy, so figure if I put enough darts down range I'm going to hit you least once

Edited by k9turrent, 27 January 2009 - 05:02 PM.

  • 0
QUOTE View Post

That's about it. And thanks Angela who helped me with these pictures.. It looks huge in her hands.


HOLY CRAP!

FU ALL

#17 TantumBull

TantumBull

    Member

  • Moderators
  • 1,929 posts
  • Location:Seattle, WA
  • State:Washington
  • Country:United States
  • u/LukeKoboJobo on Reddit

Posted 27 January 2009 - 06:10 PM

Fuck yes. Well done. Really, really well done and original too!
  • 0

#18 TheNerfLoki

TheNerfLoki

    Member

  • Members
  • 312 posts
  • Location:NY

Posted 27 January 2009 - 06:29 PM

And at Massacre 2, I was thinking (scary I know) why do people only put the RSCB on springers?

1.I assume you mean airguns.2.Nice job!!
  • 0
Am I the only one who uses the sig function for a sig?
TNL,

#19 Dr Moose

Dr Moose

    Member

  • Members
  • 149 posts
  • Location:New York

Posted 27 January 2009 - 07:19 PM

I think that this would be very good if it was just a separate barrel system, so you could take it out of the coupler and use just a normal barrel if you wanted to. Anyways, nice work!
  • 0
QUOTE(Forsaken_angel24 @ Apr 29 2008, 01:24 AM) View Post

QUOTE(Kid Flash @ Apr 27 2008, 06:11 PM) View Post

What is the best way to go at removing a stump without any power tools? Thanks ahead of time!

Be a man! Use your hands!

#20 Kid Flash

Kid Flash

    Member

  • Members
  • 1,985 posts
  • Location:Amelia, Ohio

Posted 27 January 2009 - 07:22 PM

Nice job... It looks like a very clean, awesome mod.
  • 0

#21 Merzlin

Merzlin

    Member

  • Members
  • 589 posts

Posted 27 January 2009 - 07:29 PM

1 question. How does the dart get into the barrel if you never shaked it down?
  • 0

#22 Galaxy613

Galaxy613

    Member

  • Members
  • 999 posts
  • Location:USA, Woodbridge, VA

Posted 27 January 2009 - 07:39 PM

1 question. How does the dart get into the barrel if you never shaked it down?


In the video, which I assume you are refering to, the gun was already pointing down. The action of pumping could provide enough 'shake' to get the next dart in place. And bacause the gun is pointing down, he didn't need to make sure the dart was completely in the barrel.
  • 0
[Former Caretaker of the Guru Mk2]

#23 Watari

Watari

    Member

  • Members
  • 213 posts
  • Location:Ontario, CA

Posted 27 January 2009 - 07:52 PM

Nice work! I really like how you now load it like an actual auto shotgun.

Yeah, I remember there was a home-made topic about how to make a gun load like this... well now it is worthy of the name "shotgun" because it actually loads like one.
Now if only there was a mod to make the double shot useful...
  • 0

#24 neonpistols

neonpistols

    Member

  • Members
  • 61 posts
  • Location:Illinois

Posted 27 January 2009 - 08:01 PM

That is amazing. I'm speechless.
  • 0
"All I'm gonna do is just go on and do what I feel" - Jimi Hendrix

#25 CaliforniaPants

CaliforniaPants

    Futtbrustrated

  • Moderators
  • 459 posts
  • Location:Fresno, CA
  • State:California
  • Country:United States

Posted 27 January 2009 - 08:01 PM

Is that a cpvc barrel? If so, how well do your darts fit?
  • 0

trans as shit because fuck you



0 user(s) are reading this topic

0 members, 0 guests, 0 anonymous users