17 replies to this topic

[TantumBull]

I'm looking into buying a holster from amazon, since I got some money for Christmas to spend there. I would like to purchase an airsoft holster because as I understand it they're cheaper than real ones. I'm thinking drop-leg, as that's what most people seem to prefer. The reason I can't figure out which one my self is because nerf pistols can be a bit bulkier than airsoft sidearms. I'm not sure a big enough one exists, but preferably I'd like it to be able to hold a pistol splat in it. So, does anyone have a certain holster in mind that I can check to see if amazon carries?

[bobafan]

You can always make your own. I have made a few holsters out of leather and they fit better than any you could buy. I use leather split to make my latest ones. It is probably cheaper even though it is leather. This is what I suggest. There is enough leather in that piece to make a few holsters.

[TantumBull]

You can always make your own. I have made a few holsters out of leather and they fit better than any you could buy. I use leather split to make my latest ones. It is probably cheaper even though it is leather. This is what I suggest. There is enough leather in that piece to make a few holsters.

Thanks, I'll give that a shot if nothing else comes up. I'd prefer to order through Amazon. I have a bad feeling though that there are no pre-made holsters that will fit a pistol splat.

Edited by TantumBull, 03 January 2009 - 10:13 PM.

[Groove]

The Splat is one of those guns that's a little big to be considered a standard sidearm for many, but if you're looking to holster it your best bet is to make your own since it has irregular dimensions and odd shapes to it. Alternatively, if you want something that's not so DIY I'd recommend UTG since that's what I've been using for my drop leg holster; they're incredibly well made and durable as hell.

They do make drop leg holsters for things like Mini Uzis and such, and they appear to be slightly larger than a standard drop leg holster. You could try them, but I'm not sure on the actual product dimensions. You might even have to do some modifying of the actual material here to fit a Pistol Splat. Here's a link to the Amazon store.


-Groove

[TantumBull]

Thanks. While I was searching I did come across the uzi holsters, but they looked a little box shaped. I guess I'm gonna have to take a shot at a homemade, or maybe I'll just stick to my NF as a sidearm rather than my pistol splat. I guess I'm off to instructables to figure out how to fuck with leather.

[Mr Tubb]

Another material you might use is felt. It's readily available in ~8.5x11" sheets for around a quarter each at craft stores. It also comes in lots of different colors. I've used hot glue on the stuff before (on my darts) and it has a fairly good bond since the fabric is so porous. Just an idea...

[keef]

Go to airsoftgi.com

Go into "Gear" then "Holsters" on the navigation tray thingy on the left.

Look for the Tornado holster. Its 30 bucks, but it uses velcro to be shape able for any size pistol. Personally, I use it for a M93R, which is a pretty bulky pistol.

If not, look for a MP7 holster, which is probably perfect for a maxshot, probably even splatomatic, or whatever.

[Flaming Hilt]

Another material you might use is felt. It's readily available in ~8.5x11" sheets for around a quarter each at craft stores. It also comes in lots of different colors. I've used hot glue on the stuff before (on my darts) and it has a fairly good bond since the fabric is so porous. Just an idea...

I would have to disagree with using foam as a main material. It's not strong enough to hold itself together during a war. Maybe if it were to be wrapped in duct tape...

Which is what I recommend. ;o) Duct tape wrapped around a coat hanger with strap on the parts that need to be durable (get the cheapest one at your local fabric store... probably no more than .50c/ft).

[TantumBull]

Okay, thank you for the input, everyone. I guess the bottom line is I need to be a little creative.

[Mr Tubb]

I would have to disagree with using foam as a main material.

I said felt, not foam. I know that foam would be too weak, which is why I suggested a fabric. The stuff is a little stretchy, but otherwise pretty strong.

[Draconis]

Actually, my Splat fits perfectly in a right hand power drill holster. I have two that I was going to use for TTGs, but the Splat fits just as well. I may mod it with an extra tie or something on the bottom, to keep it from flopping around when I run.

[CaliforniaPants]

Actually, my Splat fits perfectly in a right hand power drill holster. I have two that I was going to use for TTGs, but the Splat fits just as well. I may mod it with an extra tie or something on the bottom, to keep it from flopping around when I run.

Could we get a picture of this? I've been looking for a holster for my TTG with no luck.

[Draconis]

Actually, my Splat fits perfectly in a right hand power drill holster. I have two that I was going to use for TTGs, but the Splat fits just as well. I may mod it with an extra tie or something on the bottom, to keep it from flopping around when I run.

Could we get a picture of this? I've been looking for a holster for my TTG with no luck.

Yeah, if you really want one, I will. But I have two different brands of standard construction type drill holster, and they both fit TTGs and Splats very well. Just go to Lowes, Home Depot, Sears, ACE, True Value, hell... Pretty much any tool store. They are usually available in leather, sometimes also in nylon. Here is what Home Depot's website shows.

[CaliforniaPants]

Actually, my Splat fits perfectly in a right hand power drill holster. I have two that I was going to use for TTGs, but the Splat fits just as well. I may mod it with an extra tie or something on the bottom, to keep it from flopping around when I run.

Could we get a picture of this? I've been looking for a holster for my TTG with no luck.

Yeah, if you really want one, I will. But I have two different brands of standard construction type drill holster, and they both fit TTGs and Splats very well. Just go to Lowes, Home Depot, Sears, ACE, True Value, hell... Pretty much any tool store. They are usually available in leather, sometimes also in nylon. Here is what Home Depot's website shows.

Oh, I get what you're talking about now. I'll be sure to look when I go to the hardware store again.

[TantumBull]

Thank you, Draconis. I as well will be looking into those.

[goongala]

Has anyone ever tried duct tape? I have made holsters and pouches using only duct tape (and velcro to keep them closed). It's cheap and durable, if you make them right.

Edited by goongala, 15 January 2009 - 01:16 AM.

[Falcon]

Pretty much EVERYONE has tried duct tape for holsters, you know...

Tantumbull, hang tight on this. There's a custom-built made-for-the-Pistolsplat holster in the works. Details to follow.

[MOD FREAK]

This was posted at a small slowly growing NERF forum I'm am proudly an admin at: http://thenerffreaks...holster-t12.htm