Ok So I started out with my newest NF. It has a cpvc barrel 2 O-rings and a stretched spring
Then I took a peice from the Loading Indicator on the LS and hot glued it on the pullback handle
Then hot glue 2 peices of LS front gun extesion barrel to the circular part with the nerf symbol
Then reinforce the peice of plastic on the pull back handle with a peice of plastic from the sights of the front gun extesion of the LS
Then cut 2 lengths of cpvc about as long as it shows in the picture
Then Hot glue a magstrike bladder cover peice to the ends of the cpvc
then put the cpvc through the barrel pieces and pull back and push forward and there you go. And if it's not working the right way hot glue stefans head out to get it to push farther.
Bye
Edited by rifleman, 20 November 2008 - 08:49 PM.