Jump to content


Photo

Over-hand Cocking Mechanism

For the NF...and it's removable

18 replies to this topic

#1 rifleman

rifleman

    Member

  • Members
  • 44 posts
  • Location:North dakota 58103

Posted 20 November 2008 - 08:48 PM

Ok theres not much to describe but this is my first write-up. So here I go!

Posted Image

Ok So I started out with my newest NF. It has a cpvc barrel 2 O-rings and a stretched spring

Posted Image

Then I took a peice from the Loading Indicator on the LS and hot glued it on the pullback handle

Posted Image

Then hot glue 2 peices of LS front gun extesion barrel to the circular part with the nerf symbol

Posted Image

Then reinforce the peice of plastic on the pull back handle with a peice of plastic from the sights of the front gun extesion of the LS

Posted Image

Then cut 2 lengths of cpvc about as long as it shows in the picture

Posted Image

Then Hot glue a magstrike bladder cover peice to the ends of the cpvc

Posted Image

then put the cpvc through the barrel pieces and pull back and push forward and there you go. And if it's not working the right way hot glue stefans head out to get it to push farther.

Bye B)

Edited by rifleman, 20 November 2008 - 08:49 PM.

  • 0
"Nerf to all and to all Nerf all Night!"

My guns are in my PI on my profile.

More people need to nerf in North Dakota

#2 UpperHand

UpperHand

    Member

  • Members
  • 172 posts
  • Location:Wellesley, MA

Posted 20 November 2008 - 09:02 PM

I'm a little confused. What is this supposed to do? Is it purely cosmetic?
  • 0
My SCR-6
My Homemade Sidearm
QUOTE
The least you could do is tell me some advice. geese!

-- Headshot 21

#3 perezinthenet

perezinthenet

    Member

  • Members
  • 226 posts

Posted 20 November 2008 - 09:04 PM

I think it's supposed to be like an upside-down shotgun grip
  • 0

#4 bamblack2000

bamblack2000

    Member

  • Members
  • 395 posts
  • Location:New Jersey

Posted 20 November 2008 - 09:08 PM

This is very practical in a war. I mean seriously, who would keep flipping their gun upside to cock it. Plus it covers half of the barrel.

Good mod but a little unpractical.

Now go make a shotgun foregrip on a longshot. :-)
  • 0

#5 Norther of Heaven

Norther of Heaven

    Member

  • Members
  • 349 posts
  • Location:Athens, GA

Posted 20 November 2008 - 09:19 PM

Interesting.. how 'bout some bigger pictures? 800 x 600 should be big enough.
  • 0
"I don't always drink beer. But when I do,
I beat my wife."

#6 nerfer9

nerfer9

    Member

  • Members
  • 680 posts
  • State:California
  • Country:United States

Posted 20 November 2008 - 09:24 PM

I like the way it cocks like a maverick. Put a clip on it and, wow, great range and speed.
  • 0

#7 Soothsayer

Soothsayer

    Member

  • Members
  • 663 posts
  • Location:Cincinnati, Ohio
  • State:Ohio
  • Country:United States

Posted 20 November 2008 - 09:24 PM

Causing friction on the plunger rod and turning a simple side arm into an obscure mess. Hm.

I really hope this was supposed to be cosmetic, if it's supposed to be practical or useful, you should get your head checked.
  • 0

yeah I'm that guy who made that cool thing with the cool paint.


#8 Captain

Captain

    Member

  • Members
  • 814 posts
  • Location:Pepperell, Massachusetts

Posted 20 November 2008 - 09:25 PM

bamblack2000, I'm pretty sure this is meant to be used as a slide like on the recon, not as a pump. Of course he wouldn't be flipping it upside-down every time to prime it.
  • 0
I don't care what anyone else says, Atom Blasters are fucking awesome.

#9 wardrive

wardrive

    Member

  • Members
  • 66 posts

Posted 20 November 2008 - 09:35 PM

Good job, this slide is almost 100% likely to be used similar to the recon or the mav or the 8 barreled abandoned child of the n-strike family.
The NF doesn't have the multiple capaicty of the others so cocking isn't really a huge deal I guess, but it's good work and if your mod works for you then that's probably the best measure of success.
  • 0
It's not called incompetence, We call it Leadership.

#10 Lion

Lion

    Member

  • Members
  • 244 posts
  • Location:lex,ky

Posted 20 November 2008 - 10:08 PM

Never stretch your guns springs.
  • 0

#11 rifleman

rifleman

    Member

  • Members
  • 44 posts
  • Location:North dakota 58103

Posted 20 November 2008 - 10:10 PM

Causing friction on the plunger rod and turning a simple side arm into an obscure mess. Hm.

I really hope this was supposed to be cosmetic, if it's supposed to be practical or useful, you should get your head checked.

you dont glue the handle on to the charging handle. If u read it does not say to do that. Or did you just look at the last picture and assume that.
  • 0
"Nerf to all and to all Nerf all Night!"

My guns are in my PI on my profile.

More people need to nerf in North Dakota

#12 TantumBull

TantumBull

    Member

  • Moderators
  • 1,929 posts
  • Location:Seattle, WA
  • State:Washington
  • Country:United States
  • u/LukeKoboJobo on Reddit

Posted 20 November 2008 - 10:21 PM

Causing friction on the plunger rod and turning a simple side arm into an obscure mess. Hm.

I really hope this was supposed to be cosmetic, if it's supposed to be practical or useful, you should get your head checked.

you dont glue the handle on to the charging handle. If u read it does not say to do that. Or did you just look at the last picture and assume that.


There's no added friction on the plunger rod, but that wide piece you glued perpendicular to the priming rod is definitely adding mass.

priming rod + extra mass = slower plunger acceleration = less range

Edited by TantumBull, 20 November 2008 - 10:22 PM.

  • 0

#13 boom

boom

    Member

  • Banned
  • 209 posts
  • Location:yakima washington

Posted 20 November 2008 - 10:21 PM

I like the way it cocks like a maverick. Put a clip on it and, wow, great range and speed.

I definetly second that if you put a clip on it may be the most effective sidearm ever.
I'm just the scitzophrenic clusterfuck of randomness that is me.

#14 TantumBull

TantumBull

    Member

  • Moderators
  • 1,929 posts
  • Location:Seattle, WA
  • State:Washington
  • Country:United States
  • u/LukeKoboJobo on Reddit

Posted 20 November 2008 - 10:26 PM

No, it would be fat, unwieldly, and unlikely to fit in a holster.

All that a side, people need to stop bashing rifleman for this mod. (the above comment isn't bashing, just pointing out that it wouldn't work in the side arm position in a nerf war) If he wants to do it, it is his gun. It isn't all about what's "war worthy." It's about having fun, and making stuff that you think is cool. I personally wouldn't do this mod, but if he likes, then fine.
  • 0

#15 rork

rork

    Member

  • Members
  • 1,008 posts
  • Location:Sylva, NC

Posted 21 November 2008 - 01:25 AM

Carbon did something functionally similar with a SNAP a while back. Just in case you're interested...

http://nerfhaven.com...showtopic=10931
  • 0
<a href="http://nerfhaven.com...howtopic=20296" target="_blank">SNAPbow Mk. V</a>
<a href="http://nerfhaven.com...howtopic=20409" target="_blank">Make it pump-action</a>

#16 CrazyIvan VI

CrazyIvan VI

    Member

  • Members
  • 295 posts
  • Location:Kent, OH

Posted 21 November 2008 - 02:52 PM

I get what you were going for here, attempting to make it have a slide like a real gun... however, it's just not very practical.
  • 0
I get all giddy when I see VACC browsing a stupid topic. I just know someone is going to get banned.

#17 atomatron

atomatron

    Member

  • Members
  • 579 posts
  • Location:St. Paul Minnesota

Posted 21 November 2008 - 03:53 PM

Is it practical? as it is, not really.

Does it have potential? In my opinion, yes.

I was thinking of doing something like this. It would be guided by the "TACTICAL N-STRIKE RAIL"... and it would engage a breech and clip system on the front... however I have not the tools, materials nor the time to do such a project....anytime soon.
  • 0
Perche Germolgi. [Because it shoots]

Rainbow Clan

#18 BustaDartInYOurAss

BustaDartInYOurAss

    Member

  • Members
  • 148 posts
  • Location:Commack, Long Island NY

Posted 21 November 2008 - 04:38 PM

Im sorry but this is a pretty bad idea, although the PVC doesent weigh a lot. It does slow the cocking mech down a little since the mech not only pulls in, but it also has to pull the PVC back into place. Just my two cents, if it works for you, then im happy.
-bustadartinyourass-
  • 0

#19 bobafan

bobafan

    Member

  • Members
  • 635 posts
  • Location:Columbus, IN

Posted 21 November 2008 - 04:45 PM

He gets the point.

Stop repeating the same thing over and over pointlessly.
  • 0
thaygor: all i remimber is pumping it hard and shooting than trying to pump again

---

<death09>my girlfriend broke up with me and sent me pix of her and her new boyfriend in bed
<ktp753>ouch.
<death09>yeah.i sent them to her dad


0 user(s) are reading this topic

0 members, 0 guests, 0 anonymous users