There is a small O-ring around the pin inside the tank. It has either
A. It has dried up somewhat and you only have a small leak, and all you need to do is lube the O-ring up, and do so often to keep it from happening again.
B. The O-ring has ripped. You'll have to cut open the tank, and replace the O-ring. I've only done that on a 2k, and its not that hard, but the tank will leak again.
Those are the two major reasons for the their to be a leak, and the two known ways to fix it. I have had one other idea, but that has yet to be tested. That's where you lube up the pin REALLY well and then put silicone around where the pin leaves the tank. hopefully, the silicone will seal the leak, and the lube will keep the silicone from sticking to the pin so it'll still be able to move.
(edit- Most of what I said has alread been said while I was typing and forgot to hit the submit butten)
Edited by NinjaBob, 18 January 2004 - 10:08 PM.