So it's pretty much this?
Yes it is but with PEX. For me it's easier to get and cut. And there is no hot glue. I just stuck it right in the hole where the ar is drilled out.
Wait a sec, lemme get this straight: Your titan didn't explode after 100 pumps?!
Right! I actually pumped it 20, 50, 100, 150, and 200 times for testing. It worked diring all of the tests. No explosions at all. Myabe the titan design has changed a little. I got mine about 5 years ago.
Wait a sec, lemme get this straight: Your titan didn't explode after 100 pumps?!
I thought he said he had not even opened the shell. Not that I care enough to bother reading it again. It'd be tough to plug the OPRV that way. Which would mean that after 20 or so pumps, any increases were only imaginary anyway.
I'm sorry to say it but you're wrong Just Some Bob. 20 pumps only got about 50 feet . 50 pumps got over 100; 153 feet once. I find the premier pump count to be 50.
And yes Shadowblade all I did was put on a new barrel. One of the simplest titan mods i know.
No, JSB's right. The Titan has an overpressure release valve on the pump head, just like any air nerf blaster. Which means after the tank has reached a certain capacity, it releases the air you pump. So MAYBE past 20 pumps you get a
little more air to get more range, but it's not significant. And by the way, the Titan came out in late 2004, not five years ago. And were you seriously
nuts fucking insane enough to pump it
200 times? Even with the OPRV, you will ruin your gun that way. And if you didn't use any adhesive like Amazing Goop or epoxy, or even Hot Glue, you don't have any real seal around the barrel, which explains why you're only getting 100 feet or so. The Titan has the potential to hit 200' without too much effort.
Edited by Bomberman, 13 November 2008 - 04:03 PM.