Hey guys I found this a while ago. I bought some just to check it out. It really dense and fits PETG PERFECT, and the weird thing is, it is just like Blacksunshine's foam.
It's fucking TRIANGULAR.
Posted 17 April 2009 - 10:24 PM
Hey guys I found this a while ago. I bought some just to check it out. It really dense and fits PETG PERFECT, and the weird thing is, it is just like Blacksunshine's foam.
Posted 17 April 2009 - 10:26 PM
FUCK!Hey guys I found this a while ago. I bought some just to check it out. It really dense and fits PETG PERFECT, and the weird thing is, it is just like Blacksunshine's foam.
It's fucking TRIANGULAR.
Posted 17 April 2009 - 10:35 PM
Edited by 1337, 17 April 2009 - 10:37 PM.
Posted 17 April 2009 - 11:17 PM
First off, click this link to understand the definition of heat-resistant, specifically sense 3.What makes you so sure that it will not straighten? Its natural form is still most likely straight even though it has been curved. When they say 'heat resistant' I believe they mean 'resistant' to deformation through prolonged heat exposure; most likely outside. Heated foam tends to expand and thus straighten the foam back to its natural shape (which is straight) Heat resistant probably doesn't mean resistant to expansion because the foam expanding would only provide a better seal in the concrete cracks that it is meant to fill. AND even if it is resistant to straightening by heat, you could always do it the old-fashioned way and set the cut pieces out to lie somewhere and have them naturally straighten by themselves over time. I doubt this foam will be extremely resistant to straightening as you say.
P.S. If there are flaws in my reasoning then please correct me. I am fairly new here and am willing to change my opinion with significant evidence. All I am trying to say is that you shouldn't lose faith in this foam. For all we know this could be (hopefully) really good stuff!
Posted 17 April 2009 - 11:21 PM
Edited by TantumBull, 17 April 2009 - 11:24 PM.
Posted 18 April 2009 - 10:41 PM
Edited by ilzot, 18 April 2009 - 10:47 PM.
Posted 19 April 2009 - 01:36 AM
How's the fit in Sch80 PVC for Best Materials? That stuff looks dirt cheap.
But does anyone know the shipping on this?
And I did search around for 15 minutes trying to find a shipping quote or a dart fitting test.
Posted 19 April 2009 - 08:49 AM
How's the fit in Sch80 PVC for Best Materials? That stuff looks dirt cheap.
But does anyone know the shipping on this?
And I did search around for 15 minutes trying to find a shipping quote or a dart fitting test.
Search harder. Dart fit- HeretiCorp Darts, made with Mile High Black Foam
Shipping- Click that link I gave you, or go to the Best Materials Website and do a few steps in purchasing until you find it.
Edited by ilzot, 19 April 2009 - 08:55 AM.
Posted 19 April 2009 - 10:42 AM
Cera-Rod is obviously not the same as the red FBR that FA_24 had in the past and it certainly isn't like any other FBR. Considering the fact that it is heat-resistant, what are the chances that your laundry or blow dryer will be able to straighten out the curvature caused by it being shipped in a coil when both dryers use HEAT? This foam will resist being straightened.
Edited by Alkorion, 19 April 2009 - 10:44 AM.
Posted 19 April 2009 - 12:12 PM
Edited by TantumBull, 19 April 2009 - 12:57 PM.
Posted 19 April 2009 - 01:02 PM
Posted 19 April 2009 - 01:07 PM
I'll help chip in and buy some, but I can't afford it all. We should set up a group like Tantum said to help finance the 2500ft. role, then split it up among us. I'm in for helping out
Posted 19 April 2009 - 01:12 PM
Posted 19 April 2009 - 01:16 PM
Posted 19 April 2009 - 01:48 PM
Edit: Is there anyone out there interested in going in on the cera rod supplier I linked? We would need like at least five people.
Posted 19 April 2009 - 03:37 PM
draconis would be perfect, seeing as I consider him a VERY nice guy.
4 hours away, so kind of close I guess.
Edit: Is there anyone out there interested in going in on the cera rod supplier I linked? We would need like at least five people.
I have been craving some Red Foam for a while now and I would be very willing so chip in some $ for the foam. However, my parents are very cautious and protective of online transactions, ever since BSI ripped us off and sent us gray foam instead of red, and charged extra in shipping. If we get a good amount of members involved in this (like 10 or more) and they are trusted members, i would be very willing to help out with this.
Posted 21 April 2009 - 03:05 PM
Edited by Lt. Stefan, 21 April 2009 - 03:21 PM.
Posted 21 April 2009 - 03:31 PM
Posted 21 April 2009 - 04:17 PM
EDIT: If you notice this pdf says the foam is red. At the bottom the copyright date is 2003.
This pdf (which was linked to in the nhq article in Alkorions post) is copyright 2007, and is beige.
Shit...
Posted 22 April 2009 - 01:13 AM
Posted 22 April 2009 - 02:23 PM
Is this product red in color? WRM1/2CERAROD
Could I get a sample?
MailList Permission:
it is red but this item is to big to ship and would be local pick up only
sorry we have no samples of this and none in stock so we would have to order it for you
thanks
Posted 23 April 2009 - 10:29 PM
I contacted Pool and Spa Warehouse
Is this product red in color? WRM1/2CERAROD
Could I get a sample?
MailList Permission:it is red but this item is to big to ship and would be local pick up only
sorry we have no samples of this and none in stock so we would have to order it for you
thanks
0 members, 0 guests, 0 anonymous users