My Turreted Nf
#1
Posted 28 September 2008 - 08:31 AM
The gun about to be put back together with everything in place
The back air restrictor showing how I kept the seal.
The front AR all I did there was slowly shave it out with an exacto knife so it would fit the 17/32
The actual turret here you can kind of see the 1/2in(I think though im not sure as I cut the part with the label off for this project) petg I got from my local pet store. I put small stubs into the bottom of the turret with e-tape on them holding the main barrels.
Then here was the final product but I shortened the brass.
#2
Posted 28 September 2008 - 08:41 AM
Mind13
#3
Posted 28 September 2008 - 08:47 AM
#5
Posted 28 September 2008 - 09:22 AM
Mind13
#6
Posted 28 September 2008 - 09:31 AM
At the time I didn't want it on there but now I regret it. I wish I had an untouched nf shell to build this thing into so I could keep the battery compartment untouched the rail etc.
I have an extra laying aroud if you want it
Its also blue
Yes groove punching your mother solves all problems......Maybe George Bush should have done that during katrina?-foxdemon82
My sales thread
#7 Guest_Killakit_*
Posted 28 September 2008 - 11:16 AM
#8
Posted 28 September 2008 - 11:22 AM
Edited by Herpestidae, 28 September 2008 - 11:22 AM.
#10
Posted 28 September 2008 - 01:06 PM
Simple, easy, and efficient. Its also very clean.
I think I might have to do this.
Edited by Vistagecko, 28 September 2008 - 01:07 PM.
I lubed it again and again, I don't see what an extra 2 centimeters does. I don't think I will cut it off.
1 user(s) are reading this topic
0 members, 1 guests, 0 anonymous users