![Posted Image](http://i260.photobucket.com/albums/ii15/marshmallowsniper/Picture67.jpg)
![Posted Image](http://i260.photobucket.com/albums/ii15/marshmallowsniper/Picture74.jpg)
![Posted Image](http://i260.photobucket.com/albums/ii15/marshmallowsniper/Picture76.jpg)
![Posted Image](http://i260.photobucket.com/albums/ii15/marshmallowsniper/Picture75.jpg)
![:ph34r:](http://nerfhaven.com/forums/public/style_emoticons/default/cool.gif)
Posted 13 September 2008 - 09:25 AM
Posted 13 September 2008 - 12:02 PM
Here Are some pictures of my JSPB Style homemades based off the design of the "Boost".
Here You can see the double valve trigger mechanism. ( and for all the noobs reading this that is so you can keep shooting without having to pump each shot...)
A different angle... Also I can attach a inline clip or an arrow launcher.
the arrow attachment.
with the inline clip. Please comment!
Probably dead by now, or something.
Posted 13 September 2008 - 12:09 PM
The inline clip is usually a piece of thin wall PVC that holds the darts in loose. There is a tight barrel coupled to it on the end. When the gun is fired, air goes around the darts in the loose clip but fires the dart in the tight barrel. Loading varies: my friend made one that air pressure alone forced the next dart into the barrel and all he had to do was cock and fire. The ones I make have to be tilted downward for the next dart to advance.I've never understood how inline clips work, but this looks very functional and simple. Nice work. What ranges do you get with it?
Posted 13 September 2008 - 12:32 PM
Posted 13 September 2008 - 12:46 PM
Hey, would it be possible to put an incline clip on a gun like the crossbow?
Edited by Galaxy613, 13 September 2008 - 12:46 PM.
Posted 13 September 2008 - 12:53 PM
Posted 13 September 2008 - 01:05 PM
Edited by Galaxy613, 13 September 2008 - 01:05 PM.
Posted 13 September 2008 - 01:25 PM
Edited by Rambo, 13 September 2008 - 01:30 PM.
Posted 13 September 2008 - 03:30 PM
Posted 13 September 2008 - 03:33 PM
What kind of valves were they Rambo?
Also, Nice job on the homemade. 1 question though, whats holding the PVC together?
Posted 13 September 2008 - 03:40 PM
Posted 13 September 2008 - 04:19 PM
Posted 13 September 2008 - 04:26 PM
It says Ball Valve ST. Does that mean street ball vales?
Posted 13 September 2008 - 06:10 PM
Posted 13 September 2008 - 06:12 PM
The ball valves that 3DBBQ uses are similar to the metal ball valves at most hardware stores.
Posted 13 September 2008 - 06:24 PM
I disagree; it would be less than optimal with a Titan. The traditional couplered barrel would work much better due to the fact that the titan doesn't have a reserve tank as well as the firing tank. With an inline clip, each shot would have to be primed by pumping up the main tank in the Titan, compared to simply flipping the rear valve to refill the firing tank on a JSPB. You'd still have significant priming time while reducing the gun's power because of the inline clip's dead space.It should work great with a titan.
Posted 13 September 2008 - 06:36 PM
They aren't the exact same, but they are the closest we can get here. Similar open times, I think.Really? I've checked my Ace, Lowes, Home Depot and a few other ones that I can't remember the names of and I've never seen them.
Posted 13 September 2008 - 06:49 PM
Posted 13 September 2008 - 11:07 PM
Posted 13 September 2008 - 11:53 PM
Edited by Carbon, 13 September 2008 - 11:57 PM.
Posted 14 September 2008 - 12:55 AM
Posted 14 September 2008 - 03:29 PM
Edited by rork, 14 September 2008 - 03:30 PM.
Posted 17 September 2008 - 04:26 PM
Posted 17 September 2008 - 05:03 PM
If the clip portion is schd. 40 PVC, switch over to thinwal. That should give you the clearance you need, while letting you keep the same fittings.The only problem is my inline clip is working like CRAP! I think some one said this before but the "clip" part is way too tight and the darts don't slide at all... any I deas? ( other than that it's working great!)
Posted 24 September 2008 - 05:22 PM
Yeah whateverIf the clip portion is schd. 40 PVC, switch over to thinwal. That should give you the clearance you need, while letting you keep the same fittings.The only problem is my inline clip is working like CRAP! I think some one said this before but the "clip" part is way too tight and the darts don't slide at all... any I deas? ( other than that it's working great!)
Oh, and to be accurate, that's an RSCB clip, rather than an inline.
0 members, 1 guests, 0 anonymous users