So first you want to take apart the gun and take out this piece
http://s525.photobuc...t=Photo14-1.jpg
Next remove all of the Air Resitors, there should be three of the those circular orange piece in the orignal barrels of the gun, So just take them and there spring out competally
http://s525.photobuc...ent=Photo17.jpg
Next, Grap about 3 piece of 2 inch long pieces of ½ CPVC pipe
http://s525.photobuc...ent=Photo13.jpg
Then take this piece
http://s525.photobuc...ent=Photo12.jpg
Then I just hot glue then on to those little gray barrels like so
http://s525.photobuc...ent=Photo14.jpg
http://s525.photobuc...ent=Photo15.jpg
Then take your other shell of the gun (I cant find mine at the moment because it is under a lot of stuff in my closet) and screw it back together and then your done, you now have a CPVC SMDTG
I then range tested out side with tagger darts
With 15 pump:
Flat:
35 ft
38 ft
32 ft
Angeled:
45 ft
48 ft
51 ft
With 30 pumps :
Flat:
42 ft
44 ft
41 ft
Angeled:
55 ft
57 ft
53 ft
I think the wind effected some of those shot but not bad for just a barrel replacement
What do you guys think?
EDIT: Sorry that you have to click on the link to see the pictures
Edited by Icespartan_1114, 14 August 2008 - 06:55 PM.