So here's what you need:
-Two Nitefinders
-Hot Glue Gun (with glue
)-Sharpie (optional)
-Screwdriver
-Any kind of saw that makes you happy.
-Wire Cutters (not pictured)
(Note:Other materials will be used later but are optional.)
For any of you visual people, here's what you'll need:
First, what you're going to want to do, is your basic air restrictor removal and any other barrel mods you want to do on the two Nitefinders. Then, while the gun is still opened up, unscrew the silly "laser" fixture. You'll then need to cut off the wires like so:
Next, take out those little amo holders; you'll need those later. Now put it back together and it should look like this (I didn't put my internals back in yet but you should to save time):
Once that is done, cut the part where the amo holders used to be, in between the yellow and the gray. There will still be a little thread holding on, but you can just rip it off. Note: This will remove the yellow part that the barrel used to go through up top. This is done for minimization. It should now look like this:
Now, make a line like I have on the handles. This will be where you will cut to have the handles connected. The place that you cut should vary depending on your hand size:
Now cut away! It will now look like this:
Note:ALL OF THIS SHOULD BE DONE TO BOTH GUNS!
Now, take both guns and your handy-dandy hot glue gun. Slap on a bunch of glue and it should look like this:
Notice, I also added some of those extra amo slots to where we cut off that big piece before with a bunch of hot glue. Not only is this practical for carrying amo, but it also makes it look cooler.
Now, if you were really boring, you could call it quits. But, I think not! I added some extra things that make the gun cooler and more practical.
1.Electrical tape around the handle to make it more sturdy and easier to grip.
2.More amo slots in strategically placed areas.
3.Most importantly; a Crossfire Shield to protect the wrist. In place of this, you could use an old Manta shell or make one yourself.
So, this is what mine looked like in the end:
Hope you have found this entertaining to say the least! Questions and comments are greatly appreciated. Hopefully this one will end up in The Directory. And once again, I apologize for the discoloration!
