10 replies to this topic

[OfAllTheNerf]

First of all I apologize for not making any new write-ups, but my parts haven't come in on time and free time has been lacking as you can probably tell by my forum activity.

Anyways, crossbow style:



It has a 2k (CPVC coupler) Integrated into it, with a keyring as the trigger:



I've been trying different ways of glueing the keyring on, as it frequently pops off when enough force is appplied abruptly, some of which have made the trigger pull stiff. It's a bit annoying, but I'll see what it turns out like after the Goop dries.

Ranges for the Crossbow/NF part are ~80', atleast, if not more. I haven't tested the 2k yet because of the trigger.

As for the name, I couldn't think of one, thus this.

Questions, Comments?

-OfAll'

Edited by OfAllTheNerf, 25 May 2008 - 05:46 PM.

[Forsaken angel24]

Very cool.

[Green-Buckshot]

NATIVE CS-1

Nitefinder. Air Tech. Integration. Very. Extensive. Crossbow. Style. Version 1.

[Galaxy613]

Pretty nice indeed! Quite clean and I like the foam hand guard. Quite clever way of hiding the internals. Someday I'll make a NF Crossbow...

[OfAllTheNerf]

Very cool.

Thank you.

Green: Nice acronym, but I'll stick with this one , it's already stuck in my mind...

Galaxy: Thank you. I love the foam too, I think it's one of the cleanest mods I've done. They're quite fun, I'll post a write-up of how I did things a little easier (in my opinion).

-OfAll'

[Dayko]

Vary nice, Ofall. I like it. How did you connect the plunger rods together? Nail in the middle? Carbon Fiber? Epoxy Putty?

[BustaNinja]

Wait. Talking to you earlier, would the double NF be a good thing for Megas?

[Captain]

The pictures aren't working for me...

[OfAllTheNerf]

Vary nice, Ofall. I like it. How did you connect the plunger rods together? Nail in the middle? Carbon Fiber? Epoxy Putty?

Thank you. I used a steel rod with plumbers goop and fishin' glue. The stuff is the shit.

Busta: This could be good for megas, although due to the smaller air output you might get a more significant range different than with something like a Crossbow. Expect a much more accurate 60' shot though.

Captain, here and here.

Edited by OfAllTheNerf, 25 May 2008 - 05:47 PM.

[BustaNinja]

Vary nice, Ofall. I like it. How did you connect the plunger rods together? Nail in the middle? Carbon Fiber? Epoxy Putty?

Thank you. I used a steel rod with plumbers goop and fishin' glue. The stuff is the shit.

Busta: This could be good for megas, although due to the smaller air output you might get a more significant range different than with something like a Crossbow. Expect a much more accurate 60' shot though.

Captain, here and here.

Yeah, if I wanted to have the imaginary penis extension of saying my guns can shoot over 100ft, I will mod some to do that, but until then, accuracy is much more important.

Thanks for my next project. This will be great for Tower matches at SPANO.

[Galaxy613]

OfAll'; once you post your tips I think I'm going to go out and buy 2 NF's and try to make a NF crossbow.