Here's the gun stock:
![Posted Image](http://i269.photobucket.com/albums/jj51/ChiliPepperFender/airzone.jpg)
Before you start unscrewing all of the screws, get off the slider, keep these pieces:
![Posted Image](http://i269.photobucket.com/albums/jj51/ChiliPepperFender/airzone2.jpg)
Here are the internals of the gun:
![Posted Image](http://i269.photobucket.com/albums/jj51/ChiliPepperFender/airzone3.jpg)
All you need to take out is the turret here:
![Posted Image](http://i269.photobucket.com/albums/jj51/ChiliPepperFender/airzone4.jpg)
Here's the air restrictors:
![Posted Image](http://i269.photobucket.com/albums/jj51/ChiliPepperFender/airzone5.jpg)
In order to open the turret there's a screw at the top that you need to unscrew, next take a flat head screwdriver and pry it open carefully, don't force it:
![Posted Image](http://i269.photobucket.com/albums/jj51/ChiliPepperFender/airzone6.jpg)
This is the turret exploaded:
![Posted Image](http://i269.photobucket.com/albums/jj51/ChiliPepperFender/airzone7.jpg)
See all of those pegs? Sand and cut off them until it becomes smooth. Now add your barrel of choice. I chose PETG, and cut it 2 1/2 inches long. Next, glue them straight where the pegs used to be and the put the barrel assembly back together. Here's the turret now:
![Posted Image](http://i269.photobucket.com/albums/jj51/ChiliPepperFender/airzone9.jpg)
The final product:
![Posted Image](http://i269.photobucket.com/albums/jj51/ChiliPepperFender/airzonedone.jpg)
This gun sucks, don't get it unless you find it for cheap. My ranges were around the 40's untill the cocking slider broke on me. Again, if anyone knows what this gun is called please tell! All it says on the gun is Air zone and Buzz Bee.
Any questions, comments, flames?
Edited by ChiliPepperFender, 24 May 2008 - 10:28 PM.