Jump to content


Photo

Tech Target Gun

Modification

10 replies to this topic

#1 ChiliPepperFender

ChiliPepperFender

    Member

  • Members
  • 599 posts

Posted 23 May 2008 - 01:25 AM

Here's my TTG mod that I've done to my gun.

First, here's the gun stock, it's ranges are about 25-30ft stock.
Posted Image

Okay, so open it up:
Posted Image

Next, take out the barrel assembly with the plunger tube:
Posted Image

Here it is exploaded:
Posted Image

You don't need any of the items that are orange, and can throw those away. Now, take the plunger tube and get a 3" piece of barrel material. I chose PETG.
Posted Image

Hot glue/epoxy it on the plunger tube as straight as possible now:
Posted Image

Put the gun back together and such:
Posted Image

My TTG is currently being painted right now, so I'll show the final result in a day or two. The ranges of this gun after this mod is about 65ft with rubber bands, depending on the strength of them.

Questions, comments, flames?
  • 0
[The Blue Tiger][Manta Star]
WTS: Stock Crossbow. PM me if you have interest.

#2 mystefansdontflystraight

mystefansdontflystraight

    Member

  • Members
  • 1,176 posts

Posted 23 May 2008 - 11:24 AM

Nice mod chili. I love the cleanliness. You preserve the old TTg ness of the gun, and make it much more functional. If I were you, I would silence it with FBR.
  • 0
QUOTE(Blacksunshine @ Dec 24 2009, 02:15 PM) View Post

QUOTE(white moonlight @ Dec 23 2009, 01:29 PM) View Post

It's just screaming to be rearloading...

I seen a movie about that once.



#3 ChiliPepperFender

ChiliPepperFender

    Member

  • Members
  • 599 posts

Posted 24 May 2008 - 12:25 AM

Ok, I finished the paintjob, I put masking tape where the original green was and then put a coat of rustoleum blue, which is mettalic blue. Next, I put a "fade" of silver on it.
Posted Image
  • 0
[The Blue Tiger][Manta Star]
WTS: Stock Crossbow. PM me if you have interest.

#4 PC III

PC III

    Member

  • Members
  • 389 posts

Posted 24 May 2008 - 12:42 PM

Nicely done. I think cutting that wight piece off the plunger head increases the plundgerstroke by a weee bit.
  • 0
QUOTE(ultra920 @ May 19 2008, 06:18 PM) View Post

Don't want to shove balls in tight spaces. Trust me, bad idea.

For sale: Vintage WWII French rifles. Dropped once, never fired.

#5 Keeto

Keeto

    Member

  • Members
  • 5 posts

Posted 27 May 2008 - 09:11 PM

Could you somehow put a coupler on the PETG inside the barrel of the gun to stabilize it a bit? Because if I did this mod it looks like it would come of pretty easy. Or is it secure enough with being connected with the front of the gun?

Nice mod by the way.

Keeto.
  • 0
First impressions are the only ones you get...i feel sorry for shy people.

#6 ChiliPepperFender

ChiliPepperFender

    Member

  • Members
  • 599 posts

Posted 27 May 2008 - 10:18 PM

For a cpvc coupler mod, try OfAll's Mod.Also, puting something like a coupler around the PETG would work to stabalize it, but I don't think it's needed.
  • 0
[The Blue Tiger][Manta Star]
WTS: Stock Crossbow. PM me if you have interest.

#7 Dayko

Dayko

    Member

  • Members
  • 1,037 posts

Posted 28 May 2008 - 03:44 PM

Nice mod. The guns looks vary clean. You might try mini bungee cords instead of rubber bands. I can get 75-80 ( sometimes on the 80 ) feet with two mini bungee's on. You can buy them in the auto department in Wal-Mart. They are like 20 bungee's for like five bucks I think it was.
  • 0

< One foot in death...The other in life. >
 


#8 Bomberman

Bomberman

    Member

  • Members
  • 730 posts

Posted 28 May 2008 - 04:16 PM

Nice mod, but I would put some FBR in the dead space in the shell. I have to say, on that fade PJ, your edges are a bit sharp and well, edgy, for a fade. Personally, I would have done just a flat metallic blue first, and then put the silver fade. The green kind of spoils it. But, nevertheless, it looks okay. :P It's just a basic mod though. On a side-note, what kind of ranges does that SM750 in the background get? It's go PETG, and did you plug the pump?
  • 0
QUOTE(silentsnipe) View Post

It's not like that. I put lube on it and its the same. Its just stuck. And when I cock it back it goes farther back then usual. Also I push as hard as I can and it wont go back in. I've tried the methods and they wont work. Also pics are up.

#9 ChiliPepperFender

ChiliPepperFender

    Member

  • Members
  • 599 posts

Posted 28 May 2008 - 04:25 PM

With 7 pumps, which I don't recomend, I get around 90'. I'm going to make a writeup for it later this week though.
  • 0
[The Blue Tiger][Manta Star]
WTS: Stock Crossbow. PM me if you have interest.

#10 Mesohawney

Mesohawney

    Member

  • Members
  • 3 posts

Posted 09 May 2009 - 06:32 PM

cool mod I'm most definitely going to do this when I get some petg
  • 0

#11 idk59

idk59

    Member

  • Members
  • 47 posts

Posted 09 May 2009 - 06:59 PM

you should have put A PVC coupler on it. then nested the petg in the pvc. this way, u can load the dart at the end for stefans and the petg will not dent. Petg dents easily.
  • 0


2 user(s) are reading this topic

0 members, 2 guests, 0 anonymous users