10 replies to this topic

[ChiliPepperFender]

Here's my TTG mod that I've done to my gun.

First, here's the gun stock, it's ranges are about 25-30ft stock.


Okay, so open it up:


Next, take out the barrel assembly with the plunger tube:


Here it is exploaded:


You don't need any of the items that are orange, and can throw those away. Now, take the plunger tube and get a 3" piece of barrel material. I chose PETG.


Hot glue/epoxy it on the plunger tube as straight as possible now:


Put the gun back together and such:


My TTG is currently being painted right now, so I'll show the final result in a day or two. The ranges of this gun after this mod is about 65ft with rubber bands, depending on the strength of them.

Questions, comments, flames?

[mystefansdontflystraight]

Nice mod chili. I love the cleanliness. You preserve the old TTg ness of the gun, and make it much more functional. If I were you, I would silence it with FBR.

[ChiliPepperFender]

Ok, I finished the paintjob, I put masking tape where the original green was and then put a coat of rustoleum blue, which is mettalic blue. Next, I put a "fade" of silver on it.

[PC III]

Nicely done. I think cutting that wight piece off the plunger head increases the plundgerstroke by a weee bit.

[Keeto]

Could you somehow put a coupler on the PETG inside the barrel of the gun to stabilize it a bit? Because if I did this mod it looks like it would come of pretty easy. Or is it secure enough with being connected with the front of the gun?

Nice mod by the way.

Keeto.

[ChiliPepperFender]

For a cpvc coupler mod, try OfAll's Mod.Also, puting something like a coupler around the PETG would work to stabalize it, but I don't think it's needed.

[Dayko]

Nice mod. The guns looks vary clean. You might try mini bungee cords instead of rubber bands. I can get 75-80 ( sometimes on the 80 ) feet with two mini bungee's on. You can buy them in the auto department in Wal-Mart. They are like 20 bungee's for like five bucks I think it was.

[Bomberman]

Nice mod, but I would put some FBR in the dead space in the shell. I have to say, on that fade PJ, your edges are a bit sharp and well, edgy, for a fade. Personally, I would have done just a flat metallic blue first, and then put the silver fade. The green kind of spoils it. But, nevertheless, it looks okay. It's just a basic mod though. On a side-note, what kind of ranges does that SM750 in the background get? It's go PETG, and did you plug the pump?

[ChiliPepperFender]

With 7 pumps, which I don't recomend, I get around 90'. I'm going to make a writeup for it later this week though.

[Mesohawney]

cool mod I'm most definitely going to do this when I get some petg

[idk59]

you should have put A PVC coupler on it. then nested the petg in the pvc. this way, u can load the dart at the end for stefans and the petg will not dent. Petg dents easily.