Things that are needed:
Screw driver
Scout
Long Shot Front Gun
Super glue(additional)
We first start off by removing the screws on the cocking mechanism.
IPB Image
Then we remove the rest of the screws,then you will see the internals.
IPB Image
Next grab the front gun of the Long Shot (I couldn't find any pics of it so sorry and yes i searched I could only find intergrations of it)
Take out the spring from the Long Shot Front Gun and twist the end of the spring with the end of the Scout spring until it is even, now put everything back together and wallah range increase.
I haven't measured range cause my scout is a little messed up but it was a huge difference of range on mine.
Edit: Sorry about the pictures I don't know why they aren't working.
Double Edit: Oh forgot, what i meant in the super glue thing is put a dab of it on the rod to cock it to give strength
Triple Edit: Ok I got the ranges 36' flat 40' slightly angled
Quadruple Edit: I did a Barrel replacement with the petg i had lying around my dad bought from a shop, not OMC, but the ranges are better 45' least 55' highest and I don't want to make a writeup on how to make a barrel replacement and this is my first.
Edited by Your nerf killa, 04 May 2008 - 08:48 PM.