8 replies to this topic

[RustInPeace117]

Can someone please tell me what size CPVC barrels I should put in a Nitefinder, Crossfire, Tech target, and Disk Shot? I searched and I still don't know which sizes are perfect. Thanks in advance.

[andrej]

There are so many new posts that you can find in 10 seconds by searching. And there is always 10 people telling them that they are stupid and to try searching. So i might be the first to say this: SEARCH IT!

Edited by andrej, 22 April 2008 - 09:05 PM.

[Flantre]

It depends on what size of stefans you use. If you dont use stefans go with half inch.

Edited by Flantre, 22 April 2008 - 09:07 PM.

[RustInPeace117]

It depends on what size of stefans you use. If you dont use stefans go with half inch.

Ya, but what length?

[Swords]

The length of your dart.

[RustInPeace117]

The length of your dart.

The length of your dart sticking outside of the gun or in total?

[Swords]

The length of your dart that will go into the barrel. Maybe a 1/4 inch longer. Try searching and thinking for yourself, its good for your health.

[jwasko]

Read this and follow the instructions.

To get you started, ff you are using stefans, the NiteFinder get about 3-4 inches of CPVC.

If you are using stock darts, make the barrel as long as the foam part of your dart...which is probably around 2 to 2.5 inches

Edited by jwasko, 22 April 2008 - 10:07 PM.

[RustInPeace117]

Ok, thanks