#51
Posted 03 April 2008 - 09:13 PM
Unless you meant 1/2" PVC. Then I'm sorry.
If you want a singled longshot, go for telescoping brass. It will have the best effect on it, and be easiest to glue.
#52
Posted 03 April 2008 - 09:19 PM
Edit: isn't this usually used for air guns though?
Edited by bogboogalars, 03 April 2008 - 09:22 PM.
#53
Posted 03 April 2008 - 09:34 PM
On my old BBB, the telescoping barrel was very nice. I got at least 80 feet with it, but I find that it was more accurate with CPVC.
From what I've used, Brass would be your best bet, but most expensive. If sputnik's darts don't fit in CPVC thats fine, its his choice, and I hope it works for him.
#54
Posted 03 April 2008 - 09:39 PM
Thanks keef.I used it for both. 17/32" worked great with stefans in a real war. The PETG was just too loose. I tried just 1/2" PVC for stefans, but they fell out when I ran.
On my old BBB, the telescoping barrel was very nice. I got at least 80 feet with it, but I find that it was more accurate with CPVC.
From what I've used, Brass would be your best bet, but most expensive. If sputnik's darts don't fit in CPVC thats fine, its his choice, and I hope it works for him.
Right now, I don't have any CPVC, but pending a trip Casa Depot, I'll get some tomorrow.
I know that 9/16 brass fits my stefans very well, but CPVC might work too.
<3
#55
Posted 03 April 2008 - 10:11 PM
This guy can see the future!
hasbro in a nerf war!!!!! dude the will cancel it and confinscate are guns
#56
Posted 03 April 2008 - 10:15 PM
Well that's old fbr, so maybe it will fit...we'll see.If 9/16 fits, I garuntee that CPVC is too tight.
<3
#57
Posted 03 April 2008 - 10:17 PM
Also my LS has a BBB spring (no LS spring). The BBB spring works well, and it is not hard to cock the gun.
It is also angel breached.
Edited by donz2323, 03 April 2008 - 10:17 PM.
#58
Posted 03 April 2008 - 10:18 PM
This guy can see the future!
hasbro in a nerf war!!!!! dude the will cancel it and confinscate are guns
#59
Posted 03 April 2008 - 10:21 PM
The angel breech also is complicated to make and costs about as much as another LS.
I agree there. you need 4 pieces of brass, right there about $20. However I think it only requires less than 6 inches of the three sizes to you might be able to make a second... It is up to you entirely.
#60
Posted 03 April 2008 - 10:25 PM
1) Its not working.Before you go singling a good LS
2) i already have a perfectly good, 60'+, cilpped ls
3) i want a one shot, long distance weapon.
<3
#61
Posted 03 April 2008 - 10:38 PM
1) Its not working.Before you go singling a good LS
2) i already have a perfectly good, 60'+, cilpped ls
3) i want a one shot, long distance weapon.
It's up to you really.. I only posted that because you asked before as to if the loss of ROF was worth it.
If you are set on a singled LS, consider the fact that the is still primed via the sled, which is the weakest part, and you should reinforce this. Besides this fact the LS is an Ok canidate to make a long range weapon, as it is able to hold 2 springs. A combo of LS spring around an ACE spring would be cool. However you might have to work out something becaus the ACE spring is a bit short. Maybe the addition of a part of a second acespring might work as this spring holds on to the plunger shaft.
#62
Posted 03 April 2008 - 11:27 PM
I'll look tomorrow.
<3
#63
Posted 04 April 2008 - 01:22 AM
<3
#64
Posted 04 April 2008 - 01:29 AM
#65
Posted 04 April 2008 - 01:40 AM
No, this video was showing its range. The reason WHY i started this thread.What the fuck? Are you trying to use the stock barrel to shoot it out of cpvc?
I'm CPVC'ing it tomorrow.
CAPS
how did you separate these two pieces?
cutting or breaking apart?
Edited by sputnik, 04 April 2008 - 03:27 AM.
<3
#66
Posted 04 April 2008 - 05:17 PM
-Vacc
#67
Posted 04 April 2008 - 05:23 PM
So, cut it for sure and CPVC it from that peice.
I've said it before, and I'll say it again. A good nerf gun is like a good woman. It shouldn't require extra lubrication.
#68
Posted 04 April 2008 - 05:25 PM
Does anybody have FBR that fits it?
Mine is barely too big.
Good call Qui'lan Fett.
<3
#69
Posted 04 April 2008 - 05:28 PM
I've said it before, and I'll say it again. A good nerf gun is like a good woman. It shouldn't require extra lubrication.
#70
Posted 04 April 2008 - 05:54 PM
Rawr.
#71
Posted 04 April 2008 - 05:57 PM
Thanks though.1) Its not working.
2) i already have a perfectly good, 60'+, cilpped ls
3) i want a one shot, long distance weapon.
<3
#72
Posted 04 April 2008 - 05:58 PM
Rawr.
#73
Posted 05 April 2008 - 10:12 AM
And your stupid dog for eating the clip lock. I second Captain Slug.
Re enact old yeller, take a musket to his head.
It's just screaming to be rearloading...
I seen a movie about that once.
#74
Posted 05 April 2008 - 10:19 AM
Nah, its all good msdfsSorry I screwed up your mod by buying your LS spring...
And your stupid dog for eating the clip lock. I second Captain Slug.
Re enact old yeller, take a musket to his head.
did you use the spring?
<3
#75
Posted 05 April 2008 - 04:16 PM
1 user(s) are reading this topic
0 members, 1 guests, 0 anonymous users