7 replies to this topic

[Arius]

This question goes mainly to FA24, but also to the rest of the Haven.

In an attempt to clip a BBB, I have run into two issues. The first Is the method by which to connect the metal rod to the breech, and second, even at full draw, the BBB does not move far enough to completely close the breech. I need it to be able to use regular darts, and if at all possible to use an LS clip. This is because for the wars the BBB will be used in, no stefans allowed.

To illustrate, I have pics.

Breech in the open position and front of gun.



Close up. You can see the open breech, the reciever and the slot where the "bolt" should connect. Also, you can see the metal rod.



Breech closed



View through the bolt slot, breech open. (sorry, very blurry.)



View through the bolt slot, breech closed. (Also blurry, again, sorry.)





The breech was constructed out of 19/32 brass, 17/32 brass, and part of the faux barrel from a LS.

Please help me solve the problem, as I badly want this to work.

[xNFx 37]

Well, you can't get any brass breach to fire stock darts.

Their only for Stefans.

You could fire stock rounds If you do an Unknown Breach
Unknown Breach link

Sch. 40 PVC can fit the tips pretty well.

EDIT: The only Stock dart you can use is a streamline. ALso, you could cut the body of the dart to 2 inches, then the dart should fit in the breach.

Edited by xNFx 37, 18 January 2008 - 07:14 AM.

[Quilan Fett]

Also, 19/32 doesn't seal with 17/16. Use 9/16 instead.

[Arius]

The breech is sealed with etape, it works quite well actually. THe breech is not the issue. I need a way to actuate the breech open and closed with the bow, but make it go farther.

[sourskttles772]

If your not going to use stefans. I would not have used a breach.

[Arius]

somehow, I think my lack of stefans has been beat into the ground, but still, I CAN'T USE STEFANS. The wars at my school don't allow them. I would like to use the breech with a LS clip, and streamlines. Any help with that?

P.S. Posted from my iPhone, mid-war. I got three kills last round.

[xNFx 37]

You won't get an LS clip in there without the LS reciever. Try a deoderant clip.

THere's 2 ways to fix your dart-not-fitting-into-breach problem

1. Cut down your darts

2. Make your breach cut bigger so your metal rod has more barrel material to push/pull.

[vaan]

You could try fenixharth's breech. It took a ls clip, then just instead of sliding it back and forth connect the breech arm to the metal rod.